The composition of the CUM-K block breaker isA square shaped shell with flanges at both the upper and lower ends; Two horizontally placed rotating shafts equipped with a stirring blade; A grille that blocks block objects; Four end bearings, which are matched with a combined and adjustable shaft sealing component; A size matched driver with power transmission.

For materials that may produce clumping during transportation and processing, if they have soft physical properties and can be crushed, then the Hosokawa block crusher is an ideal equipment for crushing these materials. A specially designed stirrer crushes materials by rapidly rotating within a fixed grid. Equipped with two rotating shafts, this equipment has higher production capacity.

Processing capacity: 0.5 ~ 10 m3/h

Structure materials: carbon steel, 304304L stainless steel, 316L stainless steel

Multiple sizes to choose from: one or two rotating shafts with blades, as well as fixed grids.

Drive: Constant speed gearbox motor driver; Variable speed drive; Chain transmission device; Gear transmission device can also directly rotate the motor shaft.

Roll crusher:

This series of crushers consists of two sets of roller type structures, with two sets of moving rollers moving relative to each other. The material is crushed by roller pressure from the middle. Depending on the material, the rotor can be a solid roller or a hook shaped drum, mainly used for crushing brittle materials and pigments in chemical industry.

CBM claw shredder

Introduction to the manufacturing process of the internal structure of the dual axis shredder: The internal structure of the dual axis shredder adopts high-quality cutterhead and special wear-resistant and impact resistant materials for the teeth and claws, which are forged and processed through several precision machining and heat treatment processes. They are detachable, grindable, and replaceable. High torque, low speed, using hydraulic motor control and ordinary motor starting, configuration can be selected according to user investment size and automation level. There is a discharge device that automatically flips and restarts when encountering unbreakable hardware objects. The internal wear-resistant and vulnerable parts are worn. Especially when the rubber lining and partition inside the rotary valve housing are worn, they should be replaced in a timely manner. The material is damp and blocked. The rotary air lock valve of general crushing equipment is designed to allow hot air to pass through the shell interlayer, making it less likely for wet materials to stick to the shell.

Advantages of internal structure and manufacturing process of dual axis shredder:

The dual axis shredder can perform a comprehensive function of repeated tearing, squeezing, shearing, etc. in the shredding chamber. After shredding the material, the size of the finished product can be adjusted through a sieve. The finished products that can pass through the sieve are removed from the shredding chamber, otherwise they are sent back to the shredding chamber for re shredding.

Internal structure and manufacturing characteristics of double axis shredder:

1. The main shaft of the dual axis shredder is driven by a gear reducer, which runs smoothly, has low noise, high torque, high output, low energy consumption, low noise, and low dust.

2. Hydraulic feeding, independent power system, sturdy structure, smooth operation, capable of shredding large bundles and bags of plastic, convenient feeding and large quantity.

3. The PLC program control system of the shredder can automatically rotate forward and reverse, stop the machine, and achieve fully automatic operation, making the machine run safer and more reliable, energy-saving, durable, and with fewer faults. It is easy to maintain and repair.

4. Suitable for: Widely used in the primary processing of various food, chemical, waste tires, rubber, plastics, waste household appliances, leather, and wood materials.