CS turbine screw lift-Fornitore globale

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone

15288891999
Address

Tianqu Industrial Park, Decheng District, Dezhou City

Contact Now

CS turbine screw lift

Feature 1: The unique shape structure with precise surface processing can be accurately positioned on all six sides, and can be assembled and combined

Contact Supplier

More Products

Product details

Feature 1: The unique shape structure with precise surface processing allows for precise positioning on all six sides, allowing for easy assembly and combination according to usage requirements. It is praised by Europeans as a "magical block like magic block". The square shaped structure has obtained our company's "appearance design patent". 2. For low-speed heavy loads, trapezoidal screws can be used. For high-speed light loads, ball screws can be used; Screw reciprocating or nut reciprocating can be used. 3. There are N-type and L-type options available according to different reduction ratios. The input shaft of the "N-type" elevator lifts by 1mm every revolution; The input shaft of the "L-shaped" elevator lifts by 0.25mm for every revolution, making conversion extremely convenient. The maximum input speed is 1500r/min, and the maximum lifting speed is 1.5m/min

Detailed parameters of this product

Main Performance Parameters Table

Model CS	unit	CS2.5	CS5	CS10	CS25	CS50	CS150	CS250	CS350	CS500
Maximum lifting force	KN	2.5	5	10	25	50	150	250	350	500
Maximum pulling load	KN	2.5	5	10	25	50	150	250	350	500
Specification of trapezoidal screw ①		14×4	18×4	20×4	30×6	40×7	60×9	80×10	100×10	120×14
Normal speed ratio		4:1	4:1	4:1	6:1	7:1	9:1	10:1	10:1	14:1
Increase per revolution at normal speed ratio	mm/r	1.0	1.0	1.0	1.0	1.0	1.0	1.0	1.0	1.0
Slow speed ratio		16:1	16:1	16:1	24:1	28:1	36:1	40:1	40:1	56:1
Lift per revolution at slow speed ratio	mm/r	0.25	0.25	0.25	0.25	0.25	0.25	0.25	0.25	0.25
Environmental temperature 20 ℃, load ratio 20%/hr Maximum driving capability of time ②	KW	0.18	0.3	0.5	1.2	2.3	5.1	10	15	22
Environmental temperature 20 ℃, load ratio 10%/hr Maximum driving capability of time ②	KW	0.25	0.42	0.7	1.7	3.2	7.1	14	21	30
Total efficiency at normal speed ratio	%	34	30	28	27	25	19	19	15	15
Overall efficiency at slow speed ratio	%	24	23	21	19	18	14	14	11	11
Rated efficiency of screw	%	49	42.5	40	40	36.5	32.5	29	24	28
Screw torque at maximum lifting force	Nm	3.2	7.5	16	60	153	437	1390	2312	4100
Maximum allowable torque of drive shaft	Nm	1.5	3.4	7.1	18	38	93	240	340	570
Chassis material		AL			AL/QT	QT
Weight without screw and protective tube	kg	0.6	1.2	2.1	6	17	32	57	85	160
Weight of lead screw per 100mm lift	kg	0.1	0.35	0.45	0.7	1.2	2	4.2	6.6	10.3
The amount of lubricant required for transmission	kg	0.03	0.08	0.14	0.24	0.8	1.1	2.0	2.7	3.2
Ordinary speed ratio A-type mass moment of inertia ③	Kgcm²	0.070	0.122	0.160	0.780	1.917	3.412	16.04	49.12	96.27
Ordinary speed ratio B-type mass moment of inertia ③	Kgcm²	0.069	0.126	0.165	0.794	1.952	3.741	17.58	52.45	103.39
Slow speed ratio A-type mass moment of inertia ③	Kgcm²	0.045	0.088	0.115	0.558	1.371	2.628	12.35	37.05	72.62
Slow speed ratio B-type mass moment of inertia ③	Kgcm²	0.050	0.091	0.119	0.552	1.381	2.647	12.44	37.37	73.15
No load torque at normal speed ratio	Nm	0.06	0.10	0.26	0.36	0.76	1.90	2.64	3.24	3.96
Idle torque at slow speed ratio	Nm	0.04	0.8	0.16	0.26	0.54	1.20	1.94	2.20	2.84

1. Some specifications can also use ball screws.
② The maximum allowable value for A-type and trapezoidal lead screws;
The allowable value may be higher when using B-type or ball screws.
③ When referring to a screw length of 100mm.

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content