1、 Overview

according toGB/T17631 manufacturing, suitable for conducting thermal aging tests on geosynthetic materials and other materials in scientific research institutions and factories.
Temperature control adopts digital display, digital control typeThe PID automatic regulating instrument can set the working temperature freely from room temperature to 200 ℃, with automatic constant temperature. The structure of this box and the accompanying instruments and materials are designed after detailed research on the airflow and temperature inside the box, with sensitive temperature control, uniform temperature, and performance that meets standards
requirement.

IITechnical parameters:

1. Voltage: 220V
2. Number of heaters: 2 sets
3. Total power of heater: 2.4KW
4. Working temperature: 250 ℃
5. Temperature range: Room temperature+5 ℃ -250 ℃
6. Studio size: 450 × 550 × 550mm
7. Dimensions: 790 × 580 × 880mm

3、 Precautions and maintenance

3.1 matters needing attention:

3.1.1.The power supply for the local monitor and motor is input according to the label.

3.1.2.The operator must be familiar with the operation and maintenance methods of the machine and pay attention to its use.

3.1.3.The placement environment must be kept clean and not damp.

3.1.4.When necessary migration, please pay attention to handling and do not damage the components.

3.1.5.When replacing the fixture, attention should be paid to its placement to avoid dropping and damaging the parts.

3.1.6.Regularly inspect the drive belt for looseness and adjust it accordingly.

3.1.7.Please apply for regular inspection and calibration to ensure accuracy.

3.2 Maintenance and upkeep matters:

3.2.1.The surface of the machine should be regularly wiped to maintain cleanliness.

3.2.2.Please wipe the electroplating part with engine oil to prevent rusting and ensure a bright finish.

3.2.3.Please add lubricating oil to the power screw and screw parts to ensure the sensitivity of the transmission.(Lubricating oil can be mixed with butter and a small amount of engine oil.).

3.2.4.panelPlease wipe the control box or monitor with a dry cloth to prevent it from getting wet and damaging the IC electronic components.

3.2.5.Please place all fixtures and joint accessories properly and wipe them with rust proof oil to prevent rusting.