Analytical Technology (Shenzhen) Co., Ltd
Home>Products>COD pre made reagent (high)
Product Groups
Firm Information
  • Transaction Level
    VIP member
  • Contact
  • Phone
  • Address
    4th Floor, Building C, Weijian Technology Industrial Park, Beihuan Road, Shiyan Street, Bao'an District, Shenzhen
Contact Now
COD pre made reagent (high)
COD pre made reagent (high)
Product details


1、 Introduction to COD Pre made Reagents

1. This reagent has a range of 150-1500mg/L and can directly replace hash reagents. Users do not need to prepare their own reagents, saving time, improving safety, and making operation easier.

2. Time saving: The digestion time is only 20 minutes, and the entire testing process, including the digestion of water samples, colorimetric determination, and other steps, takes less than 40 minutes for a batch;

3. Compact digestion device: The COD digester developed by Analytical Technology replaces the traditional COD reflux device and can simultaneously digest up to 30 water samples;

4. Low secondary pollution to the environment: Micro reflux method only requires a small amount of reagents, and sealed reagent tubes can prevent harmful substances from splashing out and improve measurement accuracy, ensuring the safety of the digestion process;

5. The operation is simple and easy to learn, and the illustrated operation guide facilitates the mastery of COD analysis methods in a relatively short period of time.


2、 Precautions

1. If the photometer used has a circular hole sample cell that matches the pre installed tube, the pre installed tube can be directly used as a colorimetric tube; If not available, the digested liquid can be aspirated into a 1cm colorimetric dish for further testing;

2. If the user's laboratory has Hash DR series instruments (such as DR3900/DR6000/DR900/DR5000/DR2400, etc.), there is no need to draw a standard curve, and the COD 20 min LR digestion test program can be directly called for zeroing test (program number 436);

3. This COD pre packaged reagent/pre packaged tube is suitable for water samples with a chloride ion concentration not exceeding 1000 mg/L (diluted). Otherwise, an appropriate amount of mercury sulfate solid should be added in a mass ratio of m [HgSO4]: m [Cl -] ≥ 20:1;

4. Blank and test samples should be made using small tubes of the same batch number for each test, and the batch number can be found on the product label;





Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!