Product Introduction
The Boko water purifier can directly convert tap water into deionized water, meeting the experimental water needs of medical, chemical, food, university, environmental protection, testing units and other fields.
Product advantages:
1. The machine operates automatically throughout the entire process, with one click startup, simple operation, and reliable performance.
After turning on the power, the machine enters the automatic infusion program to exhaust the gas in the system to prevent damage to the reverse osmosis membrane caused by gas hammer phenomenon, and then automatically enters the water production program.
This not only reduces the self pollution of the reverse osmosis membrane, but also avoids the consumption and pollution of low water quality effluent on the subsequent resin in the early stage of reverse osmosis membrane operation, prolongs the service life of the reverse osmosis membrane and resin, saves consumables, and improves the effluent quality.
2. This machine also has a low water pressure protection function.
It can effectively prevent the water machine from working under low water pressure and shortage of source water, providing reliable protection for the high-pressure pump head.
Product Parameters
Product model SCSJ-II-60L
The inlet water requires municipal tap water, with a working inlet water pressure of 0.1-0.4Mpa and a water temperature of 15-35 ℃, and the water quality meets the requirements of GB57492
System Process PF+AC+RO+DI
DI deionized water index
Conductivity ≤ 0.1us/cm
Electrical resistivity 10-18.25M Ω· cm
Heavy metal ions<0.1ppb
Particulate matter<1/ml
Water production rate (25 ℃) 60 liters/hour
Instantaneous water output 1750ml/min
1 DI deionized water outlet
Operating environment temperature: 15-35 ℃ Relative humidity: ≤ 80%
Dimensions 470 * 400 * 1450mm
Standard configuration host+40L liquid level water tank+accessories
① The quality of the incoming water will affect the quality of pure water and the lifespan of the filter column. When the TDS of the incoming water is greater than 200ppm, it is recommended to choose an external softener
② PF: pre filtration, AC: activated carbon, RO: reverse osmosis, DI: ion exchange, optional pure water boosting module
③ Z work pressure: 0.55Mpa
