English

Dongguan Gaoxin Testing Equipment Co., Ltd
Home>Products>Battery pack simulation high-altitude test box GX-3020-ZC12M
Battery pack simulation high-altitude test box GX-3020-ZC12M
Product Name: GX-3020-ZC12M Battery Pack Simulated High Altitude Test Chamber Product Model: GX-3020-ZC12M Product Usage: The battery pack simulated h
Product details
1、 Product Name:Battery pack simulation high-altitude test box
2、 Product model: GX-3020-ZC12M
3、 Equipment Description:Battery pack simulation high-altitude test boxMainly used to simulate and evaluate the safety performance of PACK level battery packs and systems under vacuum low voltage (i.e. high altitude) conditions.High altitude battery pack testing machineSimulate that the battery is put into the low air pressure box, adjust the air pressure in the test box to the air pressure condition with an altitude of 4000m or the same height, the equipment can automatically control the test cycle (such as 5H), monitor the air pressure change in the box throughout the whole process, automatically keep the air pressure in the box constant, and realize the automatic termination of the test.
Present the actual usage status of battery packs or systems in the laboratory, identify and solve problems, optimize product design, and improve product quality.
电池包模拟高海拔试验箱
电池包模拟高海拔试验箱
GB/T 31467.3-2015
7.12 High altitude testing for lithium-ion power battery packs and systems for electric vehicles - Part 3: Safety requirements and testing methods
GB/T 31485-2015 6.2.11&6.3.11 Low pressure testing of power batteries for electric vehicles - Safety requirements and test methods
GB/T 31486-2015 Requirements and Test Methods for Electrical Performance of Power Batteries for Electric Vehicles
GB 31241-2014 Safety requirements for lithium-ion batteries and battery packs for portable electronic products
UL 1642:2012 Lithium Battery Standard
UL 2054: 2012 Household and Commercial Battery Pack
UN38.3(2012) Recommendations on the Transport of Dangerous Goods - Manual of Tests and Standards Part 3
IEC62133-2012 Safety requirements for batteries and battery packs containing alkaline or non acidic electrolytes
电池包模拟高海拔试验箱
Adjustable range of test pressure 10Kpa to 101.3Kpa
Control method PLC touch screen human-machine interface control+computer remote control (dual control mode)
Inner box material SUS304 # stainless steel plate+bottom square tube channel steel reinforcement, stainless steel plate thickness 10mm
Load bearing capacity of test box bottom plate ≥2200kG
outer box material Cold rolled steel plate paint treatment
Experimental space size W2000XD3000XH2000mm
Equipment outer box size W2500XD4000XH3000mm (excluding controller protrusion)
Load bearing capacity of turnover platform More than 2000kg
Size of turnover table top W1500XD2000XH200 mm
Box door Single door, box door with locking device
Box door lock The retaining component is a strong cold storage door handle, equipped with a locking device, with sufficient rigidity and strength, using strong explosion-proof hinges, with a quantity of 4
Sealing of box door system Using Toshiba high-purity silicone rubber raw materials, the sealing effect is good
lighting system There are 2 LED explosion-proof lighting fixtures installed on the top of the laboratory, which can prevent dust, explosion, and fire. The explosion-proof lamp housing is easy to replace
Vacuum degree display Digital vacuum degree control meter, with intuitive and easy to set digital display mode
Timing display and control PLC human-machine interface display and control time
vacuum pumping time Reduce from 101.3kPa to 11.3kPa within 5 minutes
Vacuum resolution and control accuracy 0.1Kpa
Pressure relief method There are two ways to relieve pressure: manual and automatic
vacuum pump Taiwan Crown series vacuum pump
Recording function
Sampling frequency up to 1Hz, capable of recording detection and setting test curves, data, operation records, alarm records within 12 months, printable
Pressure relief protection When the gas pressure inside the box increases, the pressure sensors near the pressure relief port can quickly open the top pressure relief port to discharge gas and heat, reducing the pressure inside the box
air source 0.8~1MPA
Use power supply AC380V 50HZ
Power 15KW
Learn moreBattery pack simulation high-altitude test boxPlease consult customer service for performance parameters, http://www.gbtest.net/

Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!