VIP member
BP-8186-B Filtration Testing Machine/PLC Type
Suitable for determining the dispersibility of plastic raw materials such as PP and PE, as well as fillers such as color masterbatch.
Product details
| BP-8186-B |
| Filtration tester/PLC type |
| LABORATORY SINGLE SCREW EXTRUDER/ FILTRABILITY TEST/EQUIPMENT CONTROL |
|
■ Explanation Suitable for determining the dispersibility of plastic raw materials such as PP and PE, as well as fillers such as color masterbatch. |
|
■related products ■BP-8176 ■BP-8177 |
1standardThe testing method complies with the European standard EN13900-5:2005 testing standard.
2、 Typical applications
1) Research and formula optimization of color masterbatch
2) Research and formula optimization of filling functional masterbatch
3) Measure the dispersibility of pigments, masterbatch, and other fillers
4) Quality Inspection and Quality Control
3、 Specification parameters
| 1. Single screw extruder | |
| Screw diameter | 20 |
| Aspect ratio | 1：25 |
| Screw material |
38CrMoAlA chromium molybdenum alloy, surface treated with quenching and tempering, nitriding, chrome plating, polishing, and ultra precision grinding processes, with a roughness Ra ≤ 0.4 μ m, nitride layer depth ≥ 0.6mm, and hardness HRC55~60
|
| Material of material cylinder | 38CrMoAlA chromium molybdenum alloy, surface treated with quenching and tempering, nitriding, chrome plating, polishing, and ultra precision grinding processes, with a roughness Ra ≤ 0.4 μ m, nitride layer depth ≥ 0.6mm, and hardness HRC55~60 |
| Heating zone | Material barrel 3-zone heater, machine head 2-zone heater, each zone with copper heat sink, covered with stainless steel safety hood |
| Cooling zone |
3 sets of multi wing fans for ultra static forced air cooling
|
| screw speed | 0-95rpm variable frequency speed regulation |
| Melt Temperature | Dynisco high-precision temperature sensor monitors changes in melt temperature |
| Quick change device | C-type snap ring connection, easy to quickly connect with downstream equipment |
| electronic control system | PLC programmable color touch screen, human-machine interface operating system, extrusion process can be dynamically displayed and monitored, including temperature control, drive, speed, pressure and other interlocking control functions |
| Power Supply | 3 ∧, AC380V, 50Hz three-phase five wire |
| Volume | 1250×550×1350 (W×D×H)mm |
| Weight | About 320kg |
| 2. Metering pump | |
| Throughput | 5cc/rev throughput |
| Rotational speed | 60rpm variable frequency speed regulation |
| Temperature | ≤350℃ |
| Pressure | ≤270bar |
| 3. Pressure sensor | |
| inlet pressure | 0-15Mpa（Dynisco） |
| KPa | 0-45Mpa（Dynisco） |
| 4. Filter mesh | |
| Filter mesh | The filter screen shall comply with the EN13900-5:2005 standard. The model specified for European standards. |
| 5. Program monitor | |
| 1. PLC programmable color touch controller, human-machine interface operating system | |
| 2. Including pressure, temperature, and flow control modules, interlocking and closed-loop control | |
| 3. Timely collect and capture the changes in melt temperature and pressure curves at every moment | |
| 4. Equipped with a USB port, it can be connected to a printer to print test results | |
| 5. Automatically generate test reports and calculate filter pressure values (FPV) | |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-