VIP member
BP-8185 Rubber Foam Rotorless Rheometer
The sulfur analyzer (vulcanizer) is not only used to measure the characteristics of rubber vulcanization and viscoelasticity, but also provides detect
Product details
| BP-8185 |
| Rubber foam rotorless sulfur analyzer |
| FOAM FORCE RHEOMETER |
|
■ Explanation The sulfur analyzer (vulcanizer) is not only used to measure the characteristics of rubber vulcanization and viscoelasticity, but also provides detection of the foaming process of foamed rubber. The various curves and data provided by this machine are the most important basis for improving products, mass production conditions, and developing new formulas. |
|
■related products ■ BP-8180 |
| Mold form | Closed mold | Open mold |
| Mold special micro | Separate the mold core from the outer frame with a sealing ring, which can be completely sealed up and down | Can accurately and freely adjust the gap between the upper and lower molds |
| Temperature control | Computer online control, PID.SSR control | |
| Control range | Room temperature~200 ℃ | |
| Temperature accuracy | Temperature error ± 0.3 ℃, minimum temperature reading 0.1 ℃ | |
| Heating rate | Room temperature~190 ℃ ＜ 8 ' | |
| Time required to change temperature | 175℃～190℃＜4' | 190℃～175℃＜4' 50" |
| Vibration frequency | 100cpm（1.66Hz）， Driven by servo motor | |
| Foaming power range | P. 1-1000kg can be automatically switched on the computer or set by oneself | |
| Pressure Unit | N, dN, Kg, lb, N/m², kg/cm², lb/in²,kpsi | |
| Torque unit | kg•cm, lb•in, N•m | |
| Minimum reading of torque and pressure | 0.001 units | |
| Vibration angle | ±0.5°, ±1°, ±2°, ±3° | |
| Test time | Time is unlimited and can be changed during testing | |
| gaspress | 4.6kg/cm ² (0.46Mpa) Customer provided gas source | |
| Sample volume | About 5cm ³ | |
| bodyamass | Host 630 × 570 × 1270 (W × D × H) mm | Host 660 × 660 × 1150 (W × D × H) mm |
| electricitysource | 1∮， AC220V，10A | |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-