The BO-500L fully automatic capacitance and inductance tester is specially developed to address the issues of measuring the capacitance values of individual capacitors in parallel capacitor banks at substations. It focuses on solving the following problems:

(1) On site measurement of a single capacitor requires dismantling the connecting wires, which not only requires a large amount of work but also easily damages the capacitor

(2) The low output voltage of the capacitance meter leads to a low fault detection rate

(3) Measure the inductance of the reactor

This instrument has the characteristics of small measurement workload, fast and simple, stable performance, accurate measurement, and high fault detection rate In addition, its current measurement unit can also be used for measuring electrical equipment such as CVTs and lightning arresters, with the function of one machine with multiple functions

Capacitor and inductance tester, fully automatic capacitor and inductance tester, non rewiring capacitor and inductance tester

1. Automatic range conversion;

2. Store 7168 test data;

3. Large screen LCD (320 × 240 LCD) display, Chinese menu operation prompts;

4. Realize the display of waveform and measurement processing data on the same screen, making the testing process more intuitive;

5. It has the functions of setting, calibration, and debugging

1. Capacity range: 0.2 μ F~2000 μ F; Capacity range: 5~20000 kvar;

Measurement accuracy: 0.2 μ F~2 μ F ± 1% reading ± 0.02 μ F; 2 μ F~2000 μ F ± 1% reading ± 2 words;

2. Inductance range: 1mH~9.99H; Measurement accuracy: ± 1.5% reading ± 2 words

3. Output measurement voltage: AC 26V/500VA; 50Hz;

4. Display mode: Large screen LCD display with full Chinese character output, TP μ p-40 panel thermal printer

5. Appearance/Weight: 370 × 370 × 220 mm/16 kg

6. Working conditions: a. Environmental temperature: 0 ℃~+40 ℃, relative humidity: ≤ 90% b. Power supply: AC 220V ± 10%; 50Hz;