Autosamdri-815, Series B critical point dryer

characteristic:

• Supercritical point dryer for square crystal and 1 "round crystal MEMS after release;

• Ensure the repeatability of the automatic processing process and results through a microprocessor controller;

• Electromagnetic valves and seals are suitable for LCO2, ethanol, and acetone;

• The inner surface is suitable for liquid carbon dioxide, high-purity ethanol, and acetone;

• Repeatable setting of operating parameters ensures the repeatability of results;

• Each run can handle 5 × 10mm square crystals or 5 × 1 "round crystals (provide a sample rack compatible with HF for easy sample processing);

• Integrated automatic temperature control;

• Built in disc fragments ensure safety;

• Each operation mode is displayed on LED, making it clear at a glance;

• Cleanroom and anti-static compatible design;

• Advanced solid-state electronic systems;

• Efficient insulation cooling system: can cool the sample chamber from room temperature to the required operating temperature within 90 seconds;

• Static pressure control module, automatically controls system pressure and maintains pressure stability;

• The 0.4 μ m internal filter system delivers clean filtered LCO2 to the sample chamber;

• The interior is equipped with lighting fixtures, and the sample chamber cover has an observation window for easy observation of the internal state of the sample chamber;

• Micro metering valve with vernier caliper, capable of repeated setting and control of flow rate;

• Standard SOTERTM condenser for separating waste ethanol and exhaust carbon dioxide.

• All electrical components comply with UL, CE, and U S. Military standards;

Specifications:

• External dimensions: Width 14.0 "(35.6 cm) x Height 10.25" (26.0 cm) x Length 21.5 "(54.6 cm);

• Floor size: Width 36 "(92 cm) x Depth 30" (76 cm);

• Sample room size: inner diameter 1.25 "x depth 1.25"; Sample chamber volume: 25ml

• Temperature range: -30 ℃ to 60 ℃, pressure range: 0-2000 psi;

• Purge time range: 0-45 minutes

• 120V/50-60HZ (optional other voltages);

Standard accessories:

• High pressure stainless steel LCO2 tube (lined with Teflon) 3 meters long;

• External LCO2 filtration device, capable of removing water/oil and particles (as small as 0.5 μ m), can be pre connected to LCO2 pipes for easy installation;

• SOTERTM condenser separates waste ethanol and exhaust carbon dioxide to reduce exhaust noise;

• Anti static exhaust pipe, used for exhaust during PURGE/VENT/BELED and COOL;

• The internal stainless steel filtration system and nickel plated filtration system jointly protect the lines, chips, and valves

• Flow meter, which can accurately control the exhaust rate of BLEED;

• 2 O-rings in the sample room, 2 lighting fixtures in the sample room, and 2 5A fuses;

• HF compatible 10mm square crystal PTFE insert holder, capable of loading up to 5 chips per operation

• One set of installation tools

• user 's manual;

• All components come with a one-year warranty.