Viscometer 180; There are coaxial systems and cone plate systems to choose from;Can be used in conjunction with CP300 system; Realize system upgrade and optimization of fully automatic temperature control, automatic lifting and lowering；

1) Temperature control range: -5~150 ℃ (this configuration is designed at 18 ℃)

(Other ranges can be customized according to requirements -20~182 ℃, with a low temperature of up to -20 ℃ at room temperature of 3 degrees Celsius and a high temperature of up to 182 ℃ at room temperature of 35 degrees Celsius) or (products in the range of -60~300 ℃ can also be customized according to requirements)

2) High precision: 0.01 ℃ resolution,

3) Stability:+/- 0.05℃

4) No need for compressor noise,

5) No need for water bath, fast heating and cooling speed, heating at 25-100 ℃ for about 2 minutes; Cool down from 100 ℃ to 25 ℃ for about 2 minutes.

6) 7-inch touch screen, capable of recording temperature control curves, programmable heating and cooling speed settings, and optional 50 segment program control.

Host technical specifications:

Viscosity: 0,002 to 10.000 Pas

Shear rate:0,8 s-1 to 3000 s-1

Torque: 0.25 to 10 mNm+/- 0,01 mNm

Speed: 5-1000rpm

Display: temperature, torque, shear rate, shear stress, viscosity, etc

Optional cone plate system:

Rotor diameter, angle, range (Pa.s)

20 0.5 0,036-338,500

20 2 0,142-1.623,000

50 0.5 0,005-21,600

50 2 0,010-86,500

70 0.5 0,005-7,750

70 2 0.005-31,500

Sample size: 0.075-2ml

Lifting system: optional electric upgrade

Temperature control system:

Optional 7-inch touch screen control semiconductor temperature control -5~150 ℃, temperature resolution: 0.01 ℃; Programmable, capable of recording temperature curves.

Controllable heating and cooling rate: 25-100 ℃ or 100 ℃ -25 ℃, approximately within 2 minutes at the fastest