Digital wedge-shaped plug gauge

OnePerformance:

1. 1. Automatic clamp gaugeUsed for measuring the dynamic and static clearances of large water pumps such as gas turbines and water turbines.
3. 2、 Digital plug gaugeInstructions for Use:
4. 1. Before use, loosen the locking screw, move the ruler frame smoothly, clean the upper and lower sides of the feeler gauge with a clean soft cloth, push the ruler to the right to the front, close the auxiliary ruler with the wedge block, and set the reading to zero.
5. 4. There are four specifications to choose from for this ruler: 1-10mm 5-15mm 10-20mm 20-30mm Users can choose the corresponding specifications and models of plug gauges according to their actual needs.
6. 5. Measurement: When measuring, insert the feeler gauge into the wedge-shaped groove, and the end face of the secondary gauge should be tightly attached to the measured surface and kept perpendicular to the bottom surface.

Direct measurement: 1-10mmCan be directly measured, and the measurement data of the wedge-shaped groove opening can be read directly on the display screen;

Additive measurement:5-15mmThe10-20mm、20-30mm When measuring with a feeler gauge, first align the secondary gauge with the end face of the wedge block and zero it, then measure the workpiece.

The numerical value displayed on the screen+The values marked on the wedge-shaped block are respectively+5mm，+10mm，+20mm）=Actual measured values.

3、 Basic parameters