CP3000 viscometer

Dual 7-inch screen control, dual Pt100 temperature sensing;

Range: 1-54000000mPa. s

Accuracy:+/-1% (current range)

Repeatability: 0.2%

Automatic temperature control: -20~300 ℃ optional, temperature resolution: 0.01 ℃, directly display temperature control curve

(Semiconductor temperature control without compressor noise)

Sample size: 0.03-~0.15ml (cone plate system)

2.1-25ml (coaxial system)

Instrument composition:

1. Host 2, temperature control system 3, lifting system 4, rotor system 5, workstation

Execution standards:

1. ISO standard 2, DIN standard 3, ASTM standard 4, GB standard, etc

The following parameters can be measured:

1. Relative dynamic viscosity (mPa. s)

2. Absolute dynamic viscosity (mPa. s)

3. Stomer viscosity (KU) (requires alternative Stomer rotor)

4. Kinematic viscosity (CST)

5. Shear rate

6. Shear stress

7. Yield stress

8. Time

9. Temperature

10. Shear thinning coefficient

rotor system

1. Cone plate system

2. Board system

3. Coaxial system

4. Brinell system

5. Anchor system

6. T-shaped rotor system, etc

The advantages of the entire system:

1) Safer:

1.1 No high-temperature external circulating water, safer to use, avoiding the risk of scalding people due to the detachment of circulating water pipes.

1.2 Low noise pollution and safer working environment.

1.3 Adopting a low-voltage circuit design for safer electricity usage.

2) More energy-efficient:

By using small volume high conductivity heating and cooling modules and effective insulation measures, energy savings of over 90% can be achieved compared to water bath temperature control methods.

3) Better to use:

3.1 Quick connection of rotor.

3.2 It is possible to record the heating and cooling curves, and perform real-time automatic control and monitoring of the experiment.

3.3 Quick software loading methods and quick editing of running programs.

3.4 It can be calibrated by oneself without returning to the factory.

4) More cost-effective:

4.1 Sample cost: Small sample size for testing: usually 0.03-0.15ml; (Depending on the rotor system), a small sample system of 2-25 milliliters can also be selected

4.2 Time cost: Fast constant temperature speed, short testing time

4.3 Labor cost: easy to clean

4.4 Maintenance cost: There are no consumables such as springs, supports, and shaft tips, which saves the cost of consumables and the time cost of production delayed by replacing consumables.

5) More value-added:

Strong scalability and unlimited appreciation, can upgrade and test the rotor system as needed, and supports the development of new rotors.

Our viscometers and rheometers are used for testing: eye drops viscometer, glue viscometer, adhesive viscometer, self-adhesive viscometer, paint viscometer, paint rheometer, cosmetic viscometer, 3D printing material viscometer, ink viscometer, battery silver paste viscometer, battery silver paste rheometer, epoxy resin viscometer, gel rheometer, starch viscometer, asphalt viscometer, cement mortar rheometer, polymer rheometer, adhesive viscometer, chocolate viscometer, tar viscometer;

If you need a detailed understanding of the CP5000 rheometer, please click on: Rheometer