FT-204Bangle of repose/Liquidity tester
FT-204B Series angle of repose meter
one. FUNCTIONAL OVERVIEWCharacteristics：
1. The stainless steel material can replace the funnel aperture, and the flowability of the material can be analyzed by testing the angle of repose and flow rate;
2. Box type sealed structure reduces occupational health and safety hazards to operators due to material inhalation, experimental environment pollution, sample cross contamination, and control of hazardous powder testing processes.
two.Working principleprinciple：
The angle of repose refers to the angle formed between the free inclined surface of the powder accumulation layer and the horizontal plane in a static equilibrium state; The commonly used method is the fixed cone method (also known as the residual cone method). The fixed cone method injects powder into the center of a finite diameter disk until the material on the oblique side of the powder accumulation layer automatically flows out along the edge of the disk, stops injection, and measures the angle of repose.
three.Reference standards
ISO4324-1977；USP(United States Pharmacopeia)BP(British Pharmacopoeia) andEPThe normative requirements of the European Pharmacopoeia refer to the following standards:DIN ISO 4324 - December 1983
four.scope of applicationscope of application：
Widely used for testing powder and granular materials in pharmaceuticals, industrial chemistry, washing, scientific research institutions, quality inspection agencies, and other related fields; It can provide changes in the storage properties of powders, especially the storage situation in the silo.
five.Model and Technical ParametersModel and technical parameters：
|
Functional projects
|
FT-204B
|
|
1. disc
|
Diameter:100mmAluminum alloy material
|
|
2. Funnel (optional)
|
2.5；4.0；5.0；6.0；7.0；8.0；9.0；10；14；15；16；17；18；25(Select specifications),standard configuration3Stainless steel material
|
|
3. Funnel volume
|
200ml.
|
|
4. Flow rate test:
|
Can test quality flow rate:0-999.9g/s
Volume flow rate:0-999.9g/ml.
|
|
5.altitude scale
|
The substrate is equipped with0-100mmThe scale is used to measure the height of a cone
|
|
6. time frame
|
timer0-9999S.
|
|
7.Trace sample testing
|
Purchase: Micro sample testing components with small sample sizes10ml
|
|
8.Export valve control
|
have
|
Comprehensive analysis solution for powder:
FT-3400 Powder Flow Behavior Analyzer (Static Mechanics, Shear Method)
FT-7100 Powder Flow Tester (Dynamic Mechanics, Drum Method or Rotary Cylinder Method)
FT-3900 Powder Yield Strength Analyzer (Uniaxial Compression Method)
FT-3500 Powder Compression Strength Tester (compressibility, compression equation)
FT-2000 Intelligent Particle and Powder Characteristics Analyzer Series (Traditional Method)
FT-301 series intelligent powder resistivity testing system (electrical performance)
ROOKO brand
-------Focused on powder&new material measurement and analysis instrument solutions
----Resolve powder characterization:
Flow and non flow analysis; Granularity; water content; Volume analysis; Conductivity and electrostatic charge analysis
----We have been doing:
Research and development, production, sales, leasing, laboratory sample analysis, and extension services
