Agilent chromatographic columnDescription:
Polyethylene glycol (PEG)
Equivalent to USP stationary phase G16
• Strong polarity
The lower temperature limit of 20 ° C is currently the lowest among all bonded PEG stationary phases, which can improve the separation of low boiling point analytes
Excellent inter column reproducibility
• Bonding and cross-linking
Can completely replace HP-WAX
• Can be rinsed with solvents
Similar fixed phase: SUPELCOWAX 10，SUPEROX II，CB-WAX，Stabilwax，BP-20，007-CW，Carbowax，
Rtx-WAX，ZB-WAX，ZB-WAX plus

Agilent chromatographic columnThe chromatographic column consists of a column tube, a pressure cap, a sleeve (sealing ring), a sieve plate (filter), a joint, screws, etc. Column tubes are often made of stainless steel. When the pressure is not higher than 70 kg/cm2, thick walled glass or quartz tubes can also be used, and the inner wall of the tube requires a high degree of smoothness. To improve column efficiency and reduce pipe wall effect, the inner wall of stainless steel columns is often polished. Some people also apply fluoroplastic on the inner wall of stainless steel columns to improve the smoothness of the inner wall, which has the same effect as polishing.

Technical parameters:
Inner diameter: 0.32mm
Length: 60m
Film thickness: 0.50um

Temperature range: 20-240/250 ℃

Part number 123-7063