overview

ARS2000WThe series intelligent integrated temperature controller is currently the latest generation of intelligent instruments among similar products. This instrument is manufactured using the latest international technology and high-quality imported components, with advantages such as stable quality, exquisite appearance, good compatibility, and easy operation. It is widely used for measuring and controlling temperature parameters in production processes in various industries such as chemical, metallurgical, power, and light industry.

particular drop

1Adopting advanced microcomputer technology.

2By using microcomputer linearization processing technology, any type of thermistor or thermocouple signal can be nonlinearly processed.

3By adopting technologies such as automatic digital zero point correction, software filtering, automatic cold end compensation, and automatic reset, the anti-interference performance of the instrument is improved.

4By using advanced imported components, all calibration parameters can still be reliably stored for a long time even in a power-off state.

5By adopting a fully automatic digital calibration system, the accuracy of the instrument has been improved, and the stability and reliability of its long-term operation have been ensured.

6It has flexible panel parameter setting function, with upper and lower limits, disconnection, and resistance indication.

7By adopting an integrated structural design, the reliability, seismic resistance, and corrosion resistance of the instrument have been improved.

Specification

lDisplay section

Double FourLEDDigital tube

2Output

aTwo point independent alarm or switch control(at most4Point, customization required);

bEach point can independently set alarm values and alarm return values;

cThe alarm function includes upper and lower limits;

3Display accuracy:≤±0.5％FS±1dig

4Digital display resolution:0.1

5Setting method:Key based numerical setting

aSet resolution:Same as display resolution

bSet accuracy:Same as the display basic error

6Input signal type:thermocouple:B、S、E、K、T、J、R、Nclass

thermal resistance:Pt100、Cu50、Cu100

7Switch output characteristics:Relay single pole single throw contact output:1A/AC250V、1A/DC24V(Resistive load)

8Operating environment:ambient temperature0～50℃(ambient temperature<0℃, in order to0℃As an environmental temperature compensation)

ambient humidity:≤90％RH;Strong corrosive gases should be avoided

supply voltage:AC220V±5％50Hz±2Hz

9Power consumption:≤5W

Power on indication

When the instrument is powered on, it first enters the system self-test state. If everything is normal, it will immediately enter the initial state display. However, if a fault is detected, the following code will be displayed5Go to the next step in seconds.

ErrlThe table indicates that the button is faulty;

Err2The table indicates that non-volatile memory has issues with parameter power-off storage;

Err3Table representation model/There is a malfunction in the data conversion;

Err4The table indicates that there are other faults.

Initial state:“IN—XX”, represents the instrument input signal code(“XX”For the input signal codes that have been set for this instrument, please refer to“1Input signal code table”).

panel layout

There are settings on the dashboard4keys:

“RS”—Force reset button

“▲”—Parameter value increase key

“SET”—Parameter selection setting key

“”—Parameter value decrease key

Status indicator light for alarm circuitALX(X=1～4)When the indicator light is on, it indicates that the alarm for that route has been activated.(Use widely available parameters to set the circuit as an upper limit, lower limit, or open circuit function alarm)

key operation
When measuring the operating status normally, press“SET”The key will appearTF-n=0Press again“▲”perhaps“ ”The key can modify its value. equalTF-nThe value is equal to“11”You can enter the parameter settings.