VIP member
A7CN/A7CN-L dip switch
Product Category: Omron DIP Switch Product Description: A7C Series Small DIP Switch Brand New Lineup ▶ This series includes all locking types to prev
Product details
| ■ Switch (single switch section) |
| model | A7CN | |||
| classification(See Note 1.) | Screw installation (later installation) | Snap in type (front installation) | ||
| character height | 3.4 mm | |||
| terminal | PCB terminals | |||
| Output code number color | light gray | black | light gray | black |
| 06 (Binary coded decimal) | --- | A7CN-106-1 | A7CN-206 | A7CN-206-1 |
| model | A7CN-L | |
| classification(See Note 1.) |
Snap in type (front installation) Locking type
|
|
| character height | 3.4 mm | |
| terminal | PCB terminals | |
| Output code number color | light gray | black |
| 06 (Binary coded decimal) | A7CN-L206 | A7CN-L206-1 |
| Note 1. The classification diagram combines the four switch sections of the end cap to create a 4-digit display. 2. The models given above are for the switch section. 3. Models with+and - displays can also be made. Add "- PM" after "206" in the model (e.g. A7CN-206-PM or A7CN-206-PM-1). |
| ■ Accessories (sold separately) |
|
Use accessories such as end caps and partitions for the switch section. |
| classification | mounting screw | Snap in type (front installation) | |
| (Installation later) | |||
| Attachment color | black | light gray | black |
| End caps (1 pair) | A7CN-1M-1 | A7CN-2M | A7CN-2M-1 |
| pad | A7CN-1P □ -1 (see note.) | A7CN-2P □ (See note.) | A7CN-2P □ -1 (see note.) |
| Note: The □ in the partition model represents the rangeAarriveUThe letters in. (See the table in the partition description below.) |
| ■ End cap |
|
End caps are used at each end of the switch section and allow all switch sections to be safely installed on the panel. They are provided in pairs, one on the left and one on the right. |
| ■ Partition board |
| The partition is used to create additional space or spacing between the switch sections, and is the same size as the switch sections themselves. There are also partitions with engraved characters or symbols that can be used to indicate units such as time and length. (Please refer to the table below.) Please consult your Omron representative office for details. |
| symbol | A | B | C | D | E | F | G | H | J | K | L | Q | T | U |
| stamp | not specified | SEC | MIN | H | g | kg | mm | cm | m | °C | PCS | x10SEC | 0 | · |
| ■ Specifications |
| Circuit breaking capacity (resistive load) | DC3.3～28V | |
| 1mA～0.1A | ||
| Continuous current carrying capacity | 1A | |
| contact resistance | Maximum 200m Ω | |
| insulation resistance | Between unconnected terminals | Minimum 10M Ω (at DC250V) |
| Between the terminal and non current carrying parts | Minimum 100M Ω (at DC500V) | |
| Dielectric Strength | Between unconnected terminals | AC200V， 50/60Hz， 1 minute |
| Between the terminal and non current carrying parts | AC1,000V， 50/60Hz， 1 minute | |
| Vibration | 10-55Hz dual amplitude 1.5mm | |
| Impact resistance | 490m/s2the above | |
| lifetime | machinery | Over 30000 times |
| electrical | Over 20000 times | |
| ambient temperature | When in use: -10 ° C to 65 ° C (without icing) | |
| When saving: -20 ° C to 80 ° C | ||
| ambient humidity | When in use: 35% to 85% | |
| Maximum action force | Below 4.41 N | |
|
(Unit: mm) switch |
|
A7CN-106-1 PCB terminals |
|
A7CN-206(-1) PCB terminals |
|
A7CN-L206(-1) PCB terminals Locking type |
|
Attachment (sold separately)
|
|
End cover for operating switches A7CN-1M-1 mounting screw |
End cover for operating switches A7CN-2M(-1) Snap in installation |
|
Partition for operating switches A7CN-1P□-1 Screw panel installation type |
Partition for operating switches A7CN-2P□(-1) Snap in installation type |
| Note: Unless otherwise specified, the dimensional tolerance of the dimensions in the above models is ± 0.4mm. |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-