The selection of steel plastic strip equipment products directly affects the effectiveness of our work. Packaging is an important means of communication. Good packaging will directly affect important changes, such as future transportation. For example, packaging is important in some book publishers. We need to use packaged products to package books for transportation and storage, so we must choose the correct plastic steel strip products. High quality plastic steel strips can meet these requirements.
Therefore, it is important to learn how to recognize. Observe the appearance color of plastic steel. This is one of the ways to distinguish between good and bad. If the color of the material is too white or gray, the stable components in the material are very poor. If used continuously, it is easy to age and turn yellow. The second approach is to choose a plastic strip with a smooth and flat surface, and there should be no exposed weld fractures. This increases the value of the product itself and reduces some protection.
Steel plastic strapping, also known as PET strapping, has good strength compared to other plastic strapping. The density of plastic strapping equipment products is very low, and the length of 1 ton of plastic steel strapping is equivalent to the length of 6 tons of steel strip. Therefore, its transportation is relatively convenient and the price is relatively low. For packaging products, plastic steel packaging comes in multiple specifications, has good elasticity, and is not easily deformed. In recent years, the demand for plastic steel strip equipment in the Chinese market has been continuously increasing, bringing great opportunities to many plastic steel strip manufacturers.

Equipment configuration sheet for reinforced PVC steel plastic strip

1、 Host SJ90 type

1.200 type hard tooth surface reducer;

2. φ 90mm, 38GrMOAL. 25:1 PVC special screw barrel;

3.37kw motor, Taiwan conventional frequency converter;

4.6 Zone automatic temperature control cabinet;

5. Automatic feeding dryer.

Comes with 4 export molds, 3 * 120; 3.5*120； 3.9*120； 4.5 * 100 (initially equipped with ordinary materials along with the equipment)

After the final size is determined through debugging by the manufacturer, 2 pieces of alloy material will be matched according to the final size

2、 Water tank: 4-meter stainless steel water tank;

3、 Wire frame: equipped with 16 dedicated wire reels, upper and lower layer structures;

4、 Traction machine

1. Double embossing traction roller；

2. Chain drive with meter counting alarm system;

3. Motor 5.5kw, Taiwan universal frequency converter;

4. A set of threading molds.

5、 Cutting: saw cutting, cylinder sliding;

6、 One set of automatic punching device;

7、 One material rack.