90% of new and second-hand centrifuges for saleCentrifugal separators are mainly used to separate solid particles from liquids in suspensions; Or separate two immiscible liquids with different densities in the emulsion (such as separating cream from milk); It can also be used to remove liquids from wet solids, such as using a washing machine to spin dry and wet clothes; Special high-speed tube separators can also separate gas mixtures of different densities, such as concentration and separation of gaseous uranium hexafluoride; By taking advantage of the different settling velocities of solid particles with different densities or particle sizes in liquids, some settling centrifuges can also classify solid particles according to density or particle size. Centrifugal separators are widely used in various sectors such as chemical, petroleum, food, pharmaceutical, mineral processing, coal, water treatment, and shipbuilding.

A centrifugal separator is a mechanical device that uses centrifugal action to separate components from liquid and solid particles or liquid and liquid mixtures, also known as a centrifuge.

Industrial centrifugal separators can be divided into filtration centrifugesThere are three types of sedimentation centrifuges and separators. Separators are only suitable for separating low concentration suspensions and emulsions, including disc separators, tube separators, and chamber separators.

Feed: When the frequency of the inverter is 30Hz, open the feed valve. When the material layer is checked to be full, close the feed valve and delay for 208. The solid and liquid substances will automatically separate, and the material layer will automatically descend. When the signal of the material layer being full disappears, open the feed valve again and load the solid and liquid mixture to be separated again. Repeat the above action three times in a row.

Solid liquid separation: When the third full charge signal is generated, the feeding valve is closed and the frequency converter frequency is increased to 50Hz for high-speed separation. The centrifugation time is set by the touch screen, and after the time is up, the frequency decreases to 40Hz.

Cleaning and drying (this action is selected according to the different separated objects): Open the cleaning valve for cleaning, and the cleaning time, pause time, and cleaning frequency can be set through the touch screen according to the different types of separated objects. After the cleaning process is completed, it enters the spin drying process. At this time, the frequency converter rises to 50Hz, and the spin time is set by the touch screen. After the spin drying is completed, it enters the unloading process.