Detailed information of 8T rubber cutting machine:
　　

: Shuanghuan

Customized processing: Yes

Type: Rubber mixer

Cutting knife: multiple knives

Style: Horizontal

Cutting blade width: 1-600 (mm)

Rubber cutter stroke: 780 (mm)

Cutting force: 60 (KN)

Cutting stroke time: 100 (s)

Work pressure: 5 (Mpa) MPa

Main motor power: 2.2 (KW) KW

Dimensions: 900 * 1400 * 2900 (m) mm

Weight: 2000 (kg) kg

Scope of use of 8T rubber cutting machine: The 8T rubber cutting machine is used to cut rubber and other plastic materials, especially suitable for installation next to the mixer and cutting small pieces of rubber material.

Advantages of the main models: no need for hot knives and glue drying; Compact structure with less land occupation

The 8T rubber cutting machine is mainly composed of a frame, a cutting blade, an oil cylinder, a base worktable, a hydraulic system, and an electrical system.

The 8T rubber cutting machine is suitable for cutting various plastic materials and rubber blocks, and is suitable for manufacturing industries such as rubber products, plastic products, and pharmaceutical products.

The 8T glue cutting machine has the following features:

1. The control system of this machine adopts automatic and semi-automatic operation modes.

2. The hydraulic system consists of gear pumps, electric motors, directional control valves, pressure valves, hydraulic control check valves, etc.

3. The operating pressure and stroke of this machine can be adjusted within the prescribed range according to the user's technical needs.

The 8T rubber cutting machine is a gantry structure, mainly composed of a machine body, hydraulic cylinder, hydraulic system, power mechanism, and worktable. It is connected to the hydraulic pump station through pipelines to form an integrated operation.

According to the usual usage situation, provide maintenance and upkeep points for users to refer to:

1. It is recommended to use 46 # hydraulic oil for work, and the oil temperature should be within the range of 15 ℃~60 ℃. In cold winter weather, it is recommended to use 32 # hydraulic oil.

2. The oil should be strictly filtered before entering the fuel tank, and the oil filling in the tank should not be lower than 2/3 of the oil level.

3. The working fluid should be replaced every six months, and the replacement time should not be two months.

4. The exposed surface of the guide column and plunger should be regularly sprayed with engine oil, and it should be sprayed once before each operation.

5. Check and calibrate the pressure gauge every six months.

6. When the machine is not in use for a long time, the surface of each processing area should be wiped clean and coated with anti rust oil.

The base of the 8T glue cutting machine's glue cutting blade is equipped with a nylon pad to maintain the cutting edge of the glue cutting blade. When cutting raw rubber, manually place the rubber material under the rubber cutting knife, and then press the start button. The rubber cutting knife will fall down along the slide on the frame under the drive of the piston rod to cut the rubber material. There are two upper and lower limit switches installed on the rack to control the directional valve to change the movement direction of the rubber cutter, and also to protect the piston cylinder head.

Jiangsu 8T rubber cutting machine Liaoning 8T rubber cutting machine Tangshan 8T rubber cutting machine Sichuan 8T rubber cutting machine Guangdong 8T rubber cutting machine Henan 8T rubber cutting machine