HAMAMATSU8-10umMid infrared broadband quantum cascade laser,peak power0.9W,80~120ns, repetition rate180KHz
8-10umQuantum cascade laser specifications:
L14890-09 |
||
Wavenumber scanning frequency |
External control(MEMSOperation signal):1.8 KHz(Typical) |
|
pulse output power |
MEMSstop it:200mW~900mW(Typical)600mW) |
|
Light pulse width |
Pre factory settings:80ns~120ns(Typical)100ns) |
|
Optical pulse frequency |
External control(QCLOperation signal: Typical180KHz |
|
Spectral line width |
MEMSstop<3.0cm-1(Typical)2.0cm-1) |
|
Beam Diameter |
distance800nm±20nm MEMSstop it:3~7mm |
|
Beam separation angle |
distance800nm±20nm MEMSstop it:<5mrad |
|
polarization |
Vertical to the bottom |
|
Center wavenumber |
Calculate scan length from wavenumber: |
|
Wave number scanning width |
pulse output power>10mWRange: |
|
INPUT VOLTAGE |
24VDC |
|
Input Current |
0.05A |
|
QCLoperating signal |
MEMSoperating signal |
|
wave form |
square-wave pulse |
sinwave |
repetitive frequency |
180KHz |
1.8KHz |
signal voltage |
4.0V |
4.0V |
Duty cycle |
1.80% |
- |
thermistor |
R25Resistance:25℃When,10±2.5% |
|
3450K |
Peltier effect current |
|
1.6A |
Peltier effect voltage |
|
2.2VQCL |
operate temperature |
|
20℃ |
Ambient Temperature |
|
10~40℃ |
Storage environment temperature |
|
5~55℃ |
Relative humidity of working environment |
|
30%~60% |
Relative humidity of storage environment |
|
20%~60% |
Start Time |
|
<5s |
Location of use |
|
indoor |
Height |
|
≤2000mm |
size |
|
82×88×112 |
weight |
|
1.2kg |
Standard productpower line2m1: |
|
stem or root of plants |
Optional Accessories2-chFunction Generator(NF CorporationProduction, Number: |
64biits) USBtwoHamamatus Photonics supercontinuum mid infrared quantum cascade laserIt is a product launched by Hamamatsu, JapanExternal cavity structure quantum cascade laserIt has been validated by the market. Effective wavelength range8-10um, with a power of up to20.9W, possessingStandard output mode:QCLOperation signal output and
MEMSOperation signal output.Hamamatsu, Japan8-10umMid infrared broadband quantum cascade laserIt is a pulsed quantum cascade laser that achieves wide wavelength scanning through an external cavity structure. It can remotely measure mid infrared spectra, is non-contact, and has high throughput. Compared to traditional
FT-IRDifferent from mid infrared spectroscopy technology, this product provides new value: high output and high wavelength resolution.Mid infrared quantum cascade laserThe system structure is as follows: including a broadband gain medium coated with an anti reflective film, non spherical mirrors on both sides, and
MEMSGrating, laser is emitted from one side of the non spherical mirror.The schematic diagram of gas detection is as follows. contain
QCLA quantum cascade laser is incident on a gas and passes through an optical path to reach a detector for analysis.The typical experimental system structure diagram is as follows, including the following components: supercontinuum quantum cascade laserL14890-092.、TECtemperature controllerC11330-023CableA11134-044Oscilloscope, function generator, infrared detector Р
C
.The structural dimension diagram is as follows:The left side of the figure shows the comparison between the absorption characteristics of polystyrene film and the results of infrared spectroscopy, while the right side shows

atr
Prism comparison of lip blood glucose levels and water glucose spectra.Characteristics of Hamamatsu Quantum Cascade Laser:-Broadband mid infrared light source(For example, oscillation wavelength: 8 um
to
10 um)-MEMS grating with fast and wide wavelength scanning built-in lens;-Based onDAUBroadband structure
QCL
;-High directivity (typical value<5mrad)
Hamamatus
Applications of quantum cascade lasers:
-Distance detection
-Process control
-Atmospheric research-Nanoscale imaging and spectroscopy-TICVOCand
GHG
Chemical and biological agent testing
-Combustion diagnosis
-Biomedical diagnosis