8-09Type high-pressure blower

8-09Application of high-pressure blower:
The 8-09 high-pressure blower has high air pressure and complete power. The purpose of the blower is to be used as a dedicated fan for iron furnaces with melting rates of 1, 2, 3, 5, and 7t/h. It can also be used for blowing and transporting non corrosive, non self igniting, and non viscous gases in various furnaces and forging furnaces. Other similar performance can also be selected, but the temperature of the conveying medium should not exceed 80 ℃, and the dust and hard particles contained in the medium should not exceed 150mg/m ³.

8-09Type of high-pressure blower:

(1) The 8-09 type fan is a single suction fan, and our company's designed machine numbers for the 8-09 type fan include six machine numbers: 6.8A, 7.1A, 7.4D, 7.7A, 8D, and 9D.

(2) The casing of the 8-09 type fan can be made in two types: clockwise rotation or counterclockwise rotation.

(3) The outlet position of the fan is represented by the outlet angle of the casing. The casing of the "forward" and "reverse" fan is made at 0 degrees, 90 degrees, and 180 degrees.

8-09Structure of high-pressure blower:
The fan is mainly composed of an impeller, a casing, an air inlet, a transmission group, seals, a machine base, etc

(1) Impeller: The impeller is designed according to the new high-efficiency forward fan theory. After the impeller is formed, it undergoes static and dynamic balance correction, so it runs smoothly.

(2) Shell: Welded into a snail shaped shell with ordinary steel plates as a whole.

(3) Air inlet: Made into a convergent streamlined overall structure, fixed to the front cover plate with bolts.

(4) Transmission group: composed of main shaft, bearing box, coupling, etc. The spindle is made of high-quality steel and the bearing housing has an overall structure. Using rolling bearings, the rolling bearings are lubricated with grease.
8-09Comparison Table of Parameters for High Pressure Blowers: