VIP member
630 ton single column hydraulic press
630 ton single column hydraulic press is made of all steel plate CO2 welded, and after welding, it undergoes tempering aging treatment to ensure defor
Product details
630 ton single column hydraulic press
630 ton single column hydraulic pressCO2 welding of all steel plates, followed by tempering aging treatment to ensure deformation of the machine body. The hydraulic system is located inside the machine body, with a beautiful appearance, easy operation, and the ability to expand the working range. It uses three sided space to extend the stroke of the hydraulic cylinder (optional). The hydraulic system of the 630 ton single column hydraulic press is arranged inside the machine body and controlled by buttons, which can achieve three operation modes: adjustment, manual, and semi-automatic. The working pressure stroke can be adjusted within the specified range. Expandable working range, utilizing three sided space, extending hydraulic cylinder stroke (optional), greatly expandable 246mm-800mm, can preset working pressure, hydraulic system cooling device, electronic digital tonnage display (optional).
Structure and characteristics of 630 ton single column hydraulic press:
1. The steel plate welded body has higher strength and rigidity, and adopts a sturdy open structure welded as a whole, which can maintain sufficient rigidity of this 630 ton hydraulic press body.
2. C-shaped body, convenient for mold installation and processing of larger materials.
3. Economical and durable, simple structure, good universality, easy maintenance and operation.
4. The 630 ton single arm hydraulic press can expand its working range according to demand, use three sided space to extend the hydraulic cylinder stroke (optional), and has a very convenient operating space.
5. It has a large stretchability of 246mm-800mm and can preset working pressure.
6. Hydraulic system cooling device (optional).
7. There are two control modes: manual and semi-automatic. The press fit upper mold can be manually stopped within any travel range, equipped with an emergency rebound button, and an infrared handguard can also be installed
8. The pressing stroke of a 630 ton single column hydraulic press is generally controlled by a timer, pressure switch, position sensor, or the customer's own mold
9. The rebound height of the press fit spindle can be adjusted within any travel range through a timer or position sensor
10. Customers can adjust the pressure, stroke, holding time, and closing height themselves for easy operation;
11. The hydraulic system is built into the frame, with a clean, lightweight, and stable appearance
12. Equipped with automatic counting function, it can also be equipped with a force measurement display and an intelligent temperature controller, which can be customized according to customer requirements.
Technical parameters of 630 ton single column hydraulic press:
The system has a high pressure of 25MPa
Throat depth 800mm
Main cylinder stroke 800mm
Large opening 1200mm
Working area 800x800mm
Fast downward speed of 80s/mm
Motor power 22KW
Optional accessories
1. Punching buffer device
2. Mobile Workbench
3. Light curtain protection device
4. Cooling device
5. There are floating guide rails and rolling brackets for mold replacement
6. Touch mode industrial display screen
7. Material feeding device (hydraulic press and mechanical)
8. Work light
9. PLC programmable control system
installation and debugging
1. Before leaving the factory, the 630 ton single column hydraulic press is assembled and debugged according to the assembly procedure. The hydraulic, electrical and other control systems are carefully inspected, and no-load testing and overload testing are carried out according to regulations.
2. The supplier is responsible for on-site guidance, assembly, and debugging for the purchaser, while the purchaser provides lifting equipment (with the cost of the lifting equipment borne by the purchaser). And provide technical training to the personnel of the demand side, so that they can master the structural performance, operation methods, and analysis, judgment, and troubleshooting skills of common equipment faults.
Application of 630 ton single column hydraulic press:
The 630 ton single column hydraulic press is suitable for implementing various cold stamping processes such as feeding, punching, forming, bending, and shallow stretching; Widely used in industrial fields such as electrical appliances, instruments, vehicles, machinery, agricultural machinery, and hardware; Calibration of shafts, pressing of sleeve parts, and shaping, trimming, and other processes of metal products; Used in industries such as plastic products, machine tools, internal combustion engines, textile machinery, shafts, bearings, washing machines, automotive motors, air conditioning motors, electrical appliances, military enterprises, and assembly lines of foreign-funded enterprises.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-