450 centrifuge

The SS450 centrifuge has a bucket diameter of 450mm, a large capacity of 25 kilograms/50 pounds, a speed of 1600 revolutions per minute, a motor power of 1.5kw, a total weight of about 210 kilograms, and external dimensions of about 900 * 600 * 600

Structural characteristics
1. Industrial centrifugal dewatering machines are all equipped with a three legged suspended pendulum structure, which can effectively reduce the foot vibration caused by the unbalanced load inside the hub during operation.
2. The shell and top cover are made of high-quality stainless steel, the cage base and chassis are made of cast iron material, and the water outlet pipe is located below the chassis.
3. The spindle is made of high-quality steel that has undergone heat treatment and precision machining.
4. The transmission part adopts triangular tape transmission, and the centrifugal starting wheel is directly driven by the motor, which can slowly start the machine and gradually reach the design speed to ensure smooth operation of the machine.
5. There is a brake opening and closing arm inside the machine, which has good braking performance and can quickly stop the machine.

Operation method

1Place the machine on a level surface, ensuring that the ground is level and even. The power connection method is delta connection. After connecting the power, test the machine once to ensure that the inner container rotates clockwise.

2Place the filter bag inside the inner container, lay it flat, and ensure that the filter cloth is tightly attached to the inner container wall.

3Place the material that needs to be dehydrated evenly and smoothlyInner linerInside, pay attentionsmoothUniformThe loading amount must not exceed the larger capacity of the machine.

4Start the machine and reach a high speed in about 30 seconds. If the machine vibrates significantly during this process, immediately disconnect the power and check if the material is flat and uniform. After the machine reaches a high speed, a large amount of liquid is discharged from the drain pipe. After about 2 minutes, the material is basically dry and there is almost no liquid flowing out of the drainage pipe. The power can be turned off. After 1 minute, apply the brake and do not brake it all at once.

5After the machine comes to a complete stop, remove the material and re lay the filter cloth in the inner tank to proceed with the next dehydration process.

6Never put materials into the machine during operation to prevent the high-speed rotating drum from throwing materials out and injuring people.The brake should not be applied all at once, but should be applied several times to stop the machine.

Customer Case

Manager Ma from Luoyang, Henan orders one20Kilogram dehydrator

On November 20, 2014, Manager Ma from a brewery in Luoyang, Henan ordered one SS450 20kg dehydrator from our company to remove liquid from distillers' grains.

Manager Wan from Zhuxi County, Shiyan, Hubei Province orders oneSS450Three legged centrifuge

On November 18, 2014, Manager Wan from a food factory in Zhuxi County, Shiyan City, Hubei Province ordered one SS450 three legged centrifuge from our company. The basic configuration of this model of three legged centrifuge is: a bucket diameter of 450mm, a larger capacity of 25 kilograms, a speed of 1600 revolutions per minute, and the inner and outer shells are made of 304 stainless steel. The total weight of the machine is about 210 kilograms.

One unitSS450Centrifuge Purchase News

On September 1, 2014, Manager Ma from Shangluo City, Shaanxi Province ordered one SS450 centrifuge from our company, also known as a three legged centrifuge, three legged centrifuge, three legged dewatering machine, centrifugal dewatering machine, etc. The configuration is as follows: the diameter of the bucket is 450mm, the larger volume is 25kg, the speed is 1600 revolutions per minute, the motor power is 1.5kw, the moisture content of the dehydrated dry material is between 10-15%, all parts in contact with the material are made of 304 stainless steel, and the total weight of the machine is about 180 kilograms. The company has arranged production and is expected to ship within 2 working days!

Manager Nanyang ordered oneSS450Three legged centrifuge

On July 29, 2014, Manager Shi from Nanyang, Henan ordered one SS450 three legged centrifuge from our company, with a motor power of 1.5kw, a speed of 1600 revolutions per minute, a capacity of 25kg, and a total weight of 150kg. The company is ready to ship!