How to operate 20000 air volume catalytic combustion equipment correctly
One When removing activated carbon from the 20000 air flow catalytic combustion device, first open the explosion-proof valve and start the desorption fan to blow the catalyst for 15 minutes,
II Then the explosion-proof valve and desorption fan are closed, and the three sets of heating pipes begin to heat in stages, with one set opened every 2 minutes. When the temperature of the catalytic combustion device reaches 200 degrees Celsius, the desorption fan is turned on to blow hot air into the adsorption box. The hot air is first transported to the mixing box for air neutralization. However, when the temperature of the hot air in the mixing box reaches a specific temperature, it is transported to the adsorption chamber of the activated carbon through the lower conveying pipe, and the activated carbon is desorbed. The temperature in the activated carbon chamber slowly increases, and the organic waste gas in the activated carbon decomposes and returns to the catalytic device through the upper pipeline. Reacts with the catalyst to produce CO2 and H2O, while generating a large amount of heat.
III At this time, the heating tube will automatically adjust and close one or several sets of heating tubes according to the indoor temperature, saving energy. The catalyst surface has ceramic heat storage bodies, which can effectively lock in heat and reduce energy consumption.
420000 air flow catalytic combustion equipmentProduct Features:
1.20000 air flow catalytic combustion equipmentBy adopting a combination process of adsorption concentration and catalytic oxidation, the entire system achieves a closed cycle purification and desorption process. Compared with organic waste gas purification devices for recycling, it does not require additional energy sources such as compressed air and steam, and does not generate secondary pollution during operation. The equipment investment and operating costs are low.
2. The front-end adopts a dry dust filtration device with high purification efficiency, ensuring the service life of the adsorption device.
3. Using specially formed honeycomb activated carbon as the adsorbent material, the adsorbent has a long lifespan, low adsorption system resistance, and high purification efficiency;
4. Honeycomb ceramics impregnated with precious metals palladium and platinum are used as catalysts, with a catalytic purification rate of over 97%, long catalyst life, low exhaust gas decomposition temperature, short desorption preheating time, and low energy consumption.
5. The activated carbon adsorption bed for adsorbing organic waste gas can recycle the hot gas after catalytic combustion for desorption and reuse. The desorbed gas is then sent to the catalytic combustion chamber for purification treatment. When the concentration of organic waste gas reaches 2000PPM or above, it can maintain spontaneous combustion. No need for additional energy, low operating costs, and significant energy-saving effects.
The 6.20000 air flow catalytic combustion equipment adopts a microcomputer centralized control system, which realizes full automation, stable and reliable operation process of the equipment.
The 7.20000 air flow catalytic combustion equipment is well-equipped, with fire dampers installed between the gas source and the equipment. The desorption temperature entering the activated carbon bed is strictly controlled during desorption, and protective measures such as flame arresters, temperature sensing rods, explosion-proof ports, alarms, and automatic shutdown are provided.
5、 The 20000 air flow catalytic combustion equipment is used to oxidize hydrocarbons in organic waste gas at low temperatures under the action of a catalyst, rapidly oxidizing them into water and carbon dioxide, achieving the purpose of treatment. Therefore, it has low energy consumption, simple operation, safety, and high purification efficiency. It is widely used in the purification of organic waste gas, especially in industries with low recycling value such as chemical, printing, painting, insulation materials, enameled wire, and coating production.
The installation period of 20000 air volume catalytic combustion equipment is about 7 days, and the debugging period is about 3 days. It takes a long time to use and has a low maintenance rate
The 20000 air flow catalytic combustion equipment is one of the products produced by Zhonghe Environmental Protection. We warmly welcome customers to visit and inspect it