one100t/hliquid crystalLCDOverview of using reverse osmosis pure water equipment

liquid crystalLCDIt is essential in our daily lives and the most rigorous in terms of water quality requirements, so in LCDLCDThe production process adopts China's advanced membrane separation technology, liquid crystalLCDUsing reverse osmosis pure water equipment100t/hWhen the pressure is high enough, water will flow through the reverse osmosis membrane, while the other end will trap impurities, bacteria, and other organic matter to ensure the safety of water qualityLCDUsing reverse osmosis pure water equipment100t/hFully meet the quality requirements of various industries.

two 100t/hliquid crystalLCDDesign of Process Structure for Reverse Osmosis Pure Water Equipment

liquid crystalLCDUsing reverse osmosis pure water equipment100t/hThe components of the reverse osmosis pressure vessel should be arranged separately on the carriage,The maximum height of the pressure vessel arrangement should be convenient for loading and unloading membrane components.

When the water production of a unit is greater than that of the equipment, it is generally recommended to use a device equipped with6only8040There are many pressure vessels with membrane components(There are also options to install7The situation of containers with only membrane components)Anyway, we should consider the operation of the reverse osmosis device when designing(compressed)At this time, the pressure vessel will elongate according to the specific pressure situation(containing6only8040The elongation distance of reverse osmosis pressure vessels with membrane components is generally within10~15mm左右)At the same time, the diameter of the pressure vessel will also slightly increase(generally0.3~0.5mm左右)Therefore, when fixing the components and pipelines of the reverse osmosis device, attention should be paid not to restrict the normal expansion of the reverse osmosis pressure vessel, otherwise it will cause the pressure vessel to warp. Once the pressure vessel is warped, it may cause damage to the built-in membrane componentsUThe leakage of the sealing ring causes groove flow and the connection of the membrane element is built inOThe sealing of the ring is leaking.

three 100t/hliquid crystalLCDOperating parameters of reverse osmosis pure water equipment

　　1Single machine output:0.25M3/H-100M3/H(Customize according to customer needs)

　　2Desalination rate: reverse osmosis system>98%(Customize single-stage or two-stage reverse osmosis units according to process requirements)

　　3Operating pressure:1Mpa-1.5Mpa

　　4Recovery rate:50%-75%prepare

5Product effluent conductivity:<10Ms/CM(raw water<500Ms/CM)

four 　100t/hliquid crystalLCDComposed of reverse osmosis pure water equipment structure

　　1High pressure pump: Hangzhou Nanfang vertical multi-stage high-pressure pump is selected as the high-pressure pump to provide sufficient pressure for reverse osmosis operation.

　　2Membrane components: selected from Dow Chemical with high desalination rate in the United States4040Membrane element, single unit(RO)Membrane desalination rate>99.3%The desalination rate of the system can reach97%The above.

　　3Pressure vessel: Select a set of stainless steel pressure vessels.

　　4Control device: Automatic operation.

　　5Bracket: equipped with high-qualitySUS304One bracket.

　　6Instrument: Equipped with a set of pressure gauges, each used to indicate the pre membrane pressure and a set of water production flow meters.