1、 Product application

The HCY9133 pressure transmitter adopts the most advanced electronic technology, thick film electronic technology. SMT technology and PFM signal transmission technology, dry pressure measurement technology without intermediate fluid, built-in ceramic capacitive resistance sensor, and a variety of field display heads can be selected: advanced technology, superior performance, anti overload, small size, light weight, simple installation and other characteristics.

2、 Product parameters

Working power supply: 12.5~36VDC

Output signal: 4~20mA or 1~5V

Vibration effect: 200Hz/g on any axis is 0.01% FS

Measurement range: 1. Relative pressure maximum 0~60Mpa minimum 0~1kpa

2. Absolute pressure maximum 0~60Mpa minimum 0~1kpa

Negative relative pressure: maximum -0.1kpa~1.0% FS

Annual stability better than 0.1% FS/year

Allowable temperature: room temperature -20~+70 ℃

Diaphragm: -20~+80 ℃ (can reach 130 ℃ in a short time)

High and low temperature type: -50~150 ℃ -200~+400 ℃

Storage temperature: -40 ℃~+85 ℃

Adjustment range: Zero adjustment range ± 5%

Full range adjustment range ± 20%

Accuracy level: 0.2 0.5 level

Temperature impact: ± 0.15% FS/year

The impact of installation location: The installation location does not affect the zero point

Explosion proof grade: Exia IICE4~CT6 (intrinsic safety type) for materials in contact with the tested medium

Process side connector: 316L stainless steel

Membrane material: 96% alumina ceramic

Seals: Fluororubber, Polytetrafluoroethylene