Product Description:

The characteristics of this high-altitude lifting platform are flexibility, convenience, and speed. You can use a lifting platform instead of scaffolding to reach the height you need and solve your problem. At the same time, it can also save you costs and valuable time. Especially suitable for high-altitude continuous operations in large areas such as airport terminals, stations, docks, shopping malls, sports venues, residential properties, factories and mines workshops.

The high-altitude work platform has the following characteristics

High altitude operations are walkable

The scissor type self-propelled high-altitude work platform has the function of automatic walking, which can move quickly and slowly in different working states. Only one person can operate the machine to continuously complete lifting, forward, backward, turning and other actions during high-altitude work.

protect

A level alarm is installed on the machine. When the vehicle tilts more than 3 degrees, the machine automatically enters the protection system and only allows the machine to have a downward movement. After reaching a safe state, it can be used normally. The high-altitude work platform is equipped with oil pipe explosion-proof systems at each oil cylinder.

stepless speed change

Only one person is needed to operate, and all actions are controlled on the workbench using an operating handle. The motor is continuously variable. Extended the service life of the battery and motor, and the motor only consumes energy during operation. The walking hydraulic system adopts a closed variable pump control system, which provides system efficiency. The boom is in any position, and the work platform can walk safely; The walking speed decreases with the increase of lifting height.

control system

Adopting PLC and CAN bus control methods, an industrial controller is installed on the chassis and platform respectively to simplify the circuit and facilitate maintenance and repair. Adopting metal air defense plug, the protection level reaches IP65. Simultaneously adopting advanced CAN bus control, the circuit is simple and reliable; Easy maintenance and fault diagnosis.

There are upper and lower control consoles (ground control console and platform control console), and the upper and lower control consoles are switched using directional switches. Lock the lower console when using the upper control.

The platform is equipped with a foot switch, which can only be operated by pressing the foot switch.

Both the upper and lower control consoles are equipped with emergency stop buttons, which can quickly cut off all actions and prevent the platform from continuing to move in case of unexpected situations.

Disc brake system

The lifting platform adopts a hydraulic disc brake system. When the machine is in a stopped state, the wheels are always in a braking state and can reliably brake on a 6-degree slope.

Extended platform

The platform can be moved out, expanding the scope of work and meeting the special needs of some users.

Overload Protection

Equipped with overload protection function, it has a protective effect on personnel who are not familiar with this equipment.

self-diagnosis

Equipped with self diagnostic function, customers can quickly grasp the working status of the equipment in a timely manner, and better maintain and upkeep the equipment.

Emergency device

The machine is equipped with an emergency descent system.