Product Introduction:

There are two types of wood chippers: drum chippers and disc chippers. Among them, drum chipper is an important classification of chippers, mainly used in paper mills, particle board factories, fiberboard factories, etc. for the production of particle board, medium density board, wood fiberboard, and papermaking industries.

Scope of application:

The raw materials for drum chippers can include: logs, branch materials, veneer, waste veneers, bamboo, cotton stalks, and other non wood fiber stems. These raw materials can be cut into wood chips of different specifications at once. As a basic raw material for making particleboard, fiberboard, non wood based panels, and pulp and paper.

working principle:
The wood is fed into the feeding port, and when it comes into contact with the cutting blade, it is cut along with the high-speed rotation of the cutting disc. The cutting mechanism is a rotating drum with several flying knives installed on it. When the flying knives rotate, the wood is processed into wood pieces. There are multiple square through holes on the outer edge of the drum, and the qualified cut pieces fall through the mesh holes and are discharged from the bottom. The larger pieces will be cut again inside the machine.

Advantages and Characteristics:

1. Drum cutting machine alloy cutting tools are wear-resistant, sharp, reliable, advanced, and improve service life. The unique crushing system design greatly improves the service life of the equipment. The crushing chamber adopts a multi-stage crushing process and fine crushing principle device, which is characterized by high working impact force, high production efficiency, and strong fine crushing ability.
2. Drum type chipper has low consumption of vulnerable parts, low operating costs, reasonable structure, advanced crushing principle and technology, reliable operation, low operating costs, and all components of the chipper have wear-resistant protection, reducing maintenance costs to the minimum. The general service life can be increased by more than 30%.
3. The main body of the drum chopper dust collector is a box, and the lower part of the box is equipped with an ash door. The box should be installed in a vertical frame. The vertical frame is covered with filter bags, and the dust collector receives dusty gas from the centrifugal separator. Enter the box through the entrance and discharge it into the external space of the machine through the filter bag.

Technical parameters: