Working principle and structure
The ZG type rotary drum grille is exquisitely designed and compact in structure, with all components made of stainless steel and no high-speed moving parts.
Full white motion control Run flat twist Can dispatch with low consumption and low noise The grid gap is small, only 1-5mm, and is guided by fluid flow The separation efficiency of the equipment can reach 97% The entire screen of the equipment can be purchased for self-cleaning during operation. sand. Non destructive equipment for debris and hard objects, with unobstructed grilles.
The device is at a 35 degree angle to the horizontal plane. The corner is installed in the water channel, and the sewage flows into the drum from the end of the drum and flows out through the grid gap on the side of the drum The grille traps suspended and floating objects in the water in the drum The drum rotates at a speed of 4.6r/min There is a nylon brush and a flushing water nozzle above the drum Remove the slag from the grid and use spiral conveying and squeezing to dry it Dehydration Transported to the upper discharge hopper and transported away by conveyor.

characteristic
1. Thoroughly clean the slag and achieve high separation efficiency.
2. Large filtration area and low hydraulic loss.
3. The angle integrates multiple functions and has a compact structure.
4. All stainless steel structure The maintenance workload is small.

Ordering Instructions
1. Indicate who is responsible for the water, the diameter of the frame, the clear distance between the ancestral pieces, and provide the process and civil engineering circle.
2. The whole machine is made of stainless steel material If there is special water quality. Please provide water quality data.