Working principle and structure
The driving device drives the working bridge to rotate along the pool plane, and the working bridge drives the sludge discharge tank to rotate
The suction pipe fixed on the mud tank sucks up the sludge at the bottom of the tank under the action of static water pressure. After being adjusted by the sludge regulating valve, it enters the discharge tank, and the sludge in the discharge tank flows into the central mud tank and is discharged outside the tank. Alternatively, the sludge can be sucked into the central mud tank from the discharge tank through siphon action. The driving device can be equipped with a torque protection device for safer operation.

characteristic

In addition to traditional carbon steel production, the main beam can also be made of aluminum alloy or stainless steel, which has a wide range of applications and good decorative effects.
2. The transmission device has been optimized for higher efficiency and a more aesthetically pleasing appearance. It can be equipped with imported reducers or shaft mounted reducers according to user requirements, which are both aesthetically pleasing and durable.
The ZBXH suction dredger has no seals or vulnerable parts underwater, making maintenance simple.

Ordering Instructions
When using a skimming device, an outflow weir plate, or an outflow channel, please specify.
2. Please indicate the material of the main channel and underwater components (carbon steel, stainless steel, aluminum alloy), and specify any special requirements for corrosion prevention.
3. The machine generally adopts a half bridge structure below ф 25m, and a full bridge structure above ф 25m. Imported reducers are required, please specify.
4. The walking wheels and driven wheels of this machine are made of iron core rubber tires. If steel wheels are required for walking, please specify. Steel rails should be laid in the well.
5. When placing an order, please provide the civil engineering drawing of the pool (indicating the pool diameter, depth, and cross-section of the water outlet).
6. For civil engineering pre embedded dimensions not listed in the table, refer to products of similar specifications and consult with the technical department of Tianhe Water Company for confirmation.