Performance characteristics:

★ Adopting computer optimized structural design, with a four column or frame style body structure;
This series of presses has independent hydraulic and electrical systems, with automatic feeding and feeding devices, floating pressing, which effectively controls the forming density of the products;
There are two demolding methods to choose from: protective demolding and general demolding;
The electrical control adopts PLC programmable controller, and the hydraulic system adopts advanced plug-in integrated valves to ensure continuous, frequent and stable operation of the hydraulic press;
★ Equipped with oil cooling device;
★ Adopting button centralized control and equipped with mechanical limit devices to ensure product consistency;
★ Ordinary control system or servo control system can be used.

Parameter Name: Parameter		Unit Unit	YJZ79Z-63	YJZ79Z-100	YJZ79Z-200	YJZ79Z-250A	YJZ79Z-315	YJZ79Z-500	YJZ79Z-630
Rated pressure nominal force		KN	630	1000	2000	2500	3150	5000	6300
Maximum working pressure of liquid. Hydraulic pressure		KN	25	25	25	25	25	25	25
The maximum distance between the lower surface of the slider and the workbench is Max. distance between the lower surface of the slide and the surface of the table		MPA	1100	1200	1500	1600	1750	2000	2200
Parameter of working slide operation parameters	Maximum Pressure	KN	630	1000	2000	2500	3150	5000	6300
	Maximum travel Max.stroke	KN	350	450	500	500	500	500	600
Parameters of working push up piston operation	Maximum push up force	KN	280	440	900	900	1250	1500	2200
	Maximum travel Max.stroke	KN	150	150	150	150	150	150	150
Upper center cylinder piston operating parameters (optional component) Parameter	Maximum extension force Max.stretch out foe	KN	60	60	80	80	80	80	100
	Maximum travel Max.stroke	MM	50	50	50	100	50	50	50
Operating parameters of the lower center oil cylinder piston (optional component) Parameter	Maximum extension force Max.stretch out foe	KN	60	60	80	60	80	80	100
	Maximum travel Max.stroke	MM	150	150	150	150	150	150	150
Operating parameters of side cylinder piston (optional component) Parameter	Maximum extension force Max.stretch out foe	KN	30	30	30	30	30	30	50
	Maximum travel Max.stroke	MM	60	60	80	100	80	100	100
Dimensions of table effective area of workbench	Left and right L-R	MM	600	800	800	800	1200	1200	1300
	Front and rear F-B	MM	600	580	800	800	800	800	1200
Motor power		KW	11	11	18.5	22	22	37	45
Qutline dimensions of main machine	Left and right L-R	MM	3200	3400	4000	5770	3400	5072	5260
	Front and rear F-B	MM	2400	2400	3000	3840	3800	3800	4000
	Height above ground	MM	4000	4000	4100	4545	4600	4800	4950

Due to the continuous improvement of the product, if there is any inconsistency between the sample technical data and the actual product data, the technical agreement parameters of both parties should be followed. No further notice will be given.