VIP member
YD-300C Ceramic Density Tester
Applicable to: precision ceramic industry and new material research units in accordance with the requirements; According to GB/T2413, 1966, 2834, ASTM
Product details
For those who require a large amount of travel, please call to communicate
Applicable to:Precision ceramic workertradeNew materialsstudyinvestigatesingleposition
According to the criteria; According to GB/T2413, 1966, 2834, ASTM C20/C134/C373/C329, EN-725, it can be applied toBoiling methodVacuum saturation method, wax sealing method for measurement
According to the principle of Archimedes' buoyancy, quickly read measurement values.
Measurement mode:
Mode 1: For non absorbent ceramic products, the specific gravity and volume of the product can be directly read
Mode 2: For ceramic products with water absorption, bulk density, wet density, apparent porosity, water absorption rate, open pore volume, sealed pore volume, and total porosity can be directly read.
Mode 3: The wax sealing method can directly read the bulk density;
Mode 4: For ceramic products with water absorption, the water absorption rate of the ceramic material can be directly read.
| Model: | YD-300C | YD-600C |
| Weighing accuracy: | 0.005g | 0.005g |
| Maximum weight: | 300 | 600 |
| Density analysis: | 0.001g/cm3 | |
| Measurement type: | Ceramic raw material, ceramic mature material, shaped parts and other solid products | |
| Measurement time: | About 10 seconds | |
| Specific gravity accuracy: | 0.001g/cm3 | |
| Setting function: | Temperature compensation setting, solution compensation setting, sealing wax density setting, saturated medium (oil) density setting | |
| Measurement function: | Bulk density, wet density, (apparent porosity, water absorption, total porosity) 0.1% (open volume, closed volume) 0.001cm3 | |
| Optional selection; | Printer constant temperature wax furnace vacuum machine | |
| Packaging size; (Length, Width, Height) | 45*24*46mm | |
| Weight; (Gross weight) | 7.5kg | |
Functional characteristics and devices:
1. No manual calculation required, fully automated data measurement. Easy to operate;
2. Support one click automatic reset and deduction of auxiliary accessory weight operation;
3. One device can complete 7 types of data measurements
4. Adopting gold-plated ceramic sensors, it has the characteristics of long corrosion resistance, long service life, and low failure rate
5. Adopting an integrated transparent measuring sink, the size of the integrated sink is: (165*115*856)mm
6. Adopting a lightweight, thin strip, stainless steel suspension rail design can greatly reduce errors caused by the buoyancy of the suspension rail line;
5. Equipment appearance dimensions; (27 * 27 * 27) mm net weight; 4.5kg
7. With an RS-232 standard interface, this densitometer can be easily connected to a computer and printer.
This machine adopts an integrated injection molding measuring frame and an integrated injection molding transparent water tank, which is easy to assemble, wear-resistant, drop resistant, corrosion-resistant, and can clearly observe the condition of the sample in the medium.
Standard attachments:
① Host, ② sink, ③ measuring table, ④ tweezers, ⑤ instruction manual, ⑥ weights, ⑦ windproof and dustproof cover, ⑧ one set of particle measuring accessories, ⑨ one set of float measuring accessories, ⑩ one power transformer
matters needing attention
How to choose a ceramic density tester that suits oneself
The ceramic industry has tested sintered products and parts. Some raw ceramic parts have water absorption and require waterproof treatment
A regular ceramic density tester is mainly used for testing the density of non absorbent ceramics and products with slight water absorption. It can quickly measure the product density in two steps
2 Professional Ceramic Density Testers for Water Absorbing Ceramics and Ceramic Raw Materials
The wax sealing method, boiling method, vacuum saturation method, and silicone oil method can be used to measure the density of ceramics
Can read ceramic porosity, water absorption rate, ceramic bulk density, ceramic apparent density
3 Large Range Ceramic Density Tester
For heavier products weighing 1 kilogram or 2 kilograms, or for heavier and larger products, customization can be made according to your requirements
The following is our recommended ceramic embryo tester solution for individual companies
If your ceramic raw material does not disintegrate in water but only absorbs water, then you can use silicone oil measurement or wax sealing method
But the sealing method is more complicated and is used by the school's research institute
Based on your company's products, first of all, we need to confirm the accuracy and specifications of the machine we are using. As your company's weight ranges from 10g to 550g, we recommend a ceramic density tester with a weight of 0-600g. If the weight exceeds 600g, the weighing accuracy of this machine will be improved; 0.005 is the only domestic 600g weighing accuracy that can reach 0.005. Other companies have weighing accuracy of 0.01 or 0.02, which is relatively low and has large measurement errors
Due to the fact that your company's product is a water absorbing product, it needs to be measured as a whole piece. If it is opened for measurement, the water absorption will be stronger and the error will be greater. Therefore, it is recommended not to open for measurement and directly measure as a whole piece. Therefore, we recommend purchasing 600 grams
Next, we recommend two ceramic density testers with different functions
If you still need to measure the sintered product, we suggest using water for measurement. We can provide an additional set of density components to save you from cleaning. Please explain to us before purchasing
The first YD-600C general ceramic density tester is called the general type because it only has the ability to measure the density of the raw material using the silicone oil method and can also be measured with water (after sintering). This machine is relatively cheaper in price
The second YD-600C professional ceramic density tester is mainly used by schools and research institutes. It has powerful functions, such as sealing wax method, boiling method, vacuum method, silicone oil method, and water solution measurement. It can also be used to measure ceramic density using various methods. The price is relatively expensive
Both of the above instruments can also measure the density of ceramic preforms using mercury, so choosing them is not wrong
When using mercury, attention should be paid to ventilation. Mercury measurement and confirmation should be compared for water absorbing products
Recommended silicone oil measurement. If your product is placed in liquid, it will disintegrate and can only be measured using mercury
- One year free warranty, lifetime maintenance;
- 7-day no reason return and exchange, 24-hour instant response;
- One on one technical guidance, allowing you to have no worries after purchasing;
- National free consultation hotline: 18659285958.
| Data Download | Update Date |
 YD-300C Ceramic Density Tester
|
2015-08-20 |
| Instruction manual download | Update Date |
|
YD-300C Ceramic Density Tester
|
2015-08-20 |
| Color page download | Update Date |
|
YD-300C Ceramic Density Tester
|
2015-08-20 |
-
-
Option 1: Customer ------->Business Manager ------->Contract Signing ------->Payment on Delivery ------->Corporate Transfer ------->Warehouse Shipment ------->Confirm Receipt ------->Our Company Invoices
Option 2: Customer ------->Business Manager ------->Contract Signing ------->Cash on Delivery ------->Warehouse Shipment ------->Express Collection ------->Confirm Receipt ------->Our Company Invoices
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-