brief introduction
The ANKOM XT10i automatic fat analyzer mainly adopts an automated operating system and also follows and innovatively develops the Soxhlet fat analysis method. Under strict temperature control, the XT10i instrument gradually accelerates the entire fat analysis process with reliable pressure. It can successfully analyze 15 samples at once, and a normal daily processing capacity can exceed 100 samples, greatly improving production and testing capabilities. It is worth noting that the solvent recovery can reach 90%. This equipment retains many of the performance of ANKOM XT15i, but the price is even lower.

characteristic

accurate

Eliminating most of the errors caused by human operation;

Consistent with the results obtained from conventional international methods;

Efficient

The operation steps are simple and programmed;

At the same time of low consumption, 15 samples can be processed in batches each time;

economy

The solvent is recovered at a rate of up to 90%, greatly reducing the input cost

The instrument itself is cheaper than similar products;

Can be handled manually, greatly reducing labor costs;

secure

Fully pressure and high temperature resistant sealed chamber extraction.

Application

(Applicable to industries such as food, feed, dairy, etc.)

1. Up to 15 samples can be analyzed at once

2. Minimal human error

3. Automatic program control, solvent automatic recovery (90%)

4. Very small footprint

Technical parameters

1、 Main technical parameters

1. Principle: According to the principle of Soxhlet extraction, extract using chemical solvents

And measure the effective fat content in the sample

2. Scope of application: Standard fat containing dry samples.

3. Application technology: Filter Bag Technology (FBT)

4. Filter bag structure: three-dimensional structure

5. Filter bag pore size: 3um

6. Intelligence level: Controlled by programmable computers and controllers to drive driversThe device completes the automatic operation of the entire sample extraction process (including fully automatic solvent heating, condensation, extraction, and fully automatic solvent recovery)

7. LCD screen data setting/adjustment display

8. Measurement range: 0-100%

9. Sampling range: 1-3g

10. Batch processing capacity: 10 pieces

11. Daily processing capacity: 120 (calculated based on 8 hours of working hours per day)

12. Batch processing time: 30-60 minutes (including heating process)

13. Standard deviation of results: ≤± 1%

14. Repeatability accuracy (linear coefficient): ≤± 1%

15. Temperature range: Room temperature to 90 ℃

16. Temperature control accuracy: ± 1 ℃

17. Solvent recovery rate: 90%, fully automatic recovery

18. Security performance: Multi point security monitoring. Low temperature extraction, maximum heatingTemperature of 90 ℃, intelligent automatic water circulation cooling, with over temperature shutdown protection function, automatic shutdown temperature: 105 ℃. The processes of fat extraction, solvent recovery, etc. are carried out completely in a sealed state, without any irritating odor that may cause discomfort to the human body. Alloy cylinder body, enclosed environment, manual operation

19. Environmental protection situation: Activated carbon ultra trace tail gas adsorption, no need to carryA ventilated kitchen and a standard laboratory are sufficient

20. The main materials used for the instrument are high-temperature resistant and highly corrosive thickened alloy steel,Compliant with various international product quality system certification standards such as EC/CE, CSA, UL, etc

2、 Configuration:

1. One fully automatic fat analyzer host;

2. 1 heat sealer;

3. 2 inert black marker pens;

4. 1000 dedicated inert filter bags