VIP member
XME5000 dual input liquid level difference display control transmitter
Scope of application: This series of instruments has two input terminals and can be adapted to two liquid level sensors. It can input two liquid level
Product details
Functional Features
※ Input signal
l Both input terminals can receive0～10mA，4～20mA，0～5V，1～5VThe signal can be switched between them by pressing the button, which is set and used immediately.
l Two input terminals allow for the selection of different input signals and the setting of different signal ranges.
※ Dual screen display
The main screen displays the liquid level difference. Liquid level difference(△L)=liquid level1（PV1）-liquid level2（PV2）
Attached screen with selectable display of liquid level1Liquid level2Alarm set value or transmission output value.
※ Four liquid level difference alarm control output relays, their alarm control values and alarm modes (upper limit alarm)/Both lower limit alarm and alarm return can be set separately.
※ Level difference isolation transmission output.
l 0～10mA，4～20mA，0～5V，1～5VOutput can be set.
l The transmission range can be freely set.
※ Can be carriedRS485/ RS232/ModemWait for isolated communication interface.
※ Additional features: Optional dual level dual light column display
TECHNICAL INDEX
|
※ Usage conditions: |
ambient temperature: 0～50℃relative humidity:≤90% |
|
※ Power supply voltage: |
AC90V～265V (50～60HZ)perhapsDC24±10%V |
|
Basic error: |
0.5%F. Sscholar1character |
|
※ Display resolution: |
0.001, 0.01, 0.1, one |
|
※ Input characteristics: |
Electric couple type:Input impedance greater than10MΩ |
|
Also obstructive type:lead resistanceimportantask0～5Ω,Three lines are equal |
|
|
voltage source:Input impedance greater than300kΩ |
|
|
current mode:Input impedance less than or equal to250Ω |
|
|
※ Output characteristics: |
Relay capacity: 3A/220VACperhaps3A/24VDC,Resistive load |
|
48×96Small watch and96×96Fang Ai.0.5A/240VAC |
|
|
Output load impedance of current type transducer:less than600Ω |
|
|
Voltage type AC output load:greater than200KΩ |
|
|
※ Internal cold end Compensed Temperature Range: |
0～50℃ |
|
※ Transmitter power output: |
voltage24scholar10%VDC,Maximum current30mA,Can be directly connected to a two-wire passive transmitter |
|
※ Power consumption: |
＜3W |
|
※ Weight: |
＜ 0.5kg |
Instrument appearance and dimensions
Appearance(mm)： 160×80×150 80×160×150 80×160×150
hole(mm)： 152+1.00×76+0.74 76+0.74×152+1.00 76+0.74×152+1.00
|
type table |
speak bright |
||||||||||
|
XME |
Intelligent digital display control transmission instrument |
||||||||||
|
Design sequence |
5 |
Dual input, dual light column, dual digital display |
|||||||||
|
control type |
0 |
Without control alarm |
|||||||||
|
1 |
Equipped with two position control or single limit alarm |
||||||||||
|
2 |
Equipped with three position control or dual limit alarm |
||||||||||
|
Input signal class type IN1 |
5 |
Adapt to DC0～10mA |
|||||||||
|
6 |
Adapt to DC4～20mA |
||||||||||
|
7 |
Adapt to DC0～5V |
||||||||||
|
8 |
Adapt to DC1～5V |
||||||||||
|
Input signal class type IN2 |
5 |
Adapt to DC0～10mA |
|||||||||
|
6 |
Adapt to DC4～20mA |
||||||||||
|
7 |
Adapt to DC0～5V |
||||||||||
|
8 |
Adapt to DC1～5V |
||||||||||
|
Transmission output class type |
5 |
0～10mATransmission output |
|||||||||
|
6 |
4～20mATransmission output |
||||||||||
|
7 |
0～5VTransmission output |
||||||||||
|
8 |
1～5VTransmission output |
||||||||||
|
9 |
Special specification transmission output |
||||||||||
|
outline structure |
160×80×150mmhorizontal table |
||||||||||
|
V |
80×160×150mmVertical Table |
||||||||||
|
GV |
80×160×150mmVertical light column meter |
||||||||||
|
become different deliver implement power distribution |
Default is without DC power output |
||||||||||
|
P |
With DC24V(25mA)Power Output |
||||||||||
|
power supply class type |
power supply220VAC |
||||||||||
|
D |
power supply24VDC |
||||||||||
|
communication interface class type |
Without communication interface |
||||||||||
|
RS485 |
RS485Isolation communication interface |
||||||||||
|
Special function code |
□□□□ |
0000Indicates no special function code, |
|||||||||
XME5000Series dual input liquid level difference display control transmitter
Example explanation:XME506560000 XME5000Series digital control transmission instrument, dual input dual digital display,4～20mAINPUT(IN1),0～10mA(IN2)Signal input,4～20mASignal transmission output, power supply24VDCNo special function code.
XME5000Series wiring diagram
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-