XLC Cyclone Sand Setter-Fornitore globale

No. 88 Zhaozhuang Road, Yangmiao Town, Hanjiang District, Yangzhou City (Yangzhou Environmental Protection Technology Industrial Park)

Product Introduction

The cyclone desander is made based on the screening principle of solid particles in the fluid rotating in the desander. It integrates cyclone and filtration, and achieves significant effects in sand removal, turbidity reduction, solid-liquid separation, etc. in the field of water treatment. Widely used in industrial sectors such as water source heat pumps, water treatment, food, and medicine. Sand removal from river and well water, coal washing water, industrial beneficiation, liquid degassing, and separation of immiscible liquids.

Application scenarios：

1Cyclone sand settling deviceGenerally used for separating larger inorganic particles (generally larger than 0.5mm in diameter) in the sewage before and after the grid of the primary sedimentation tank in urban domestic sewage treatment plants. Most of them use air to lift sand, and if a sand pump is used to lift sand, the wear requirements are generally higher. The steel tank body is suitable for small and medium-sized flow applications.

2. When applied to a single cyclone sand settling tank and using air stripping sand, its combined structure function is similar to that of a Dole sand settling tank, but in the treatment situation, this combined structure occupies a small area and has high efficiency.

working principle:

The raw water enters from the tangential direction and initially forms a vortex. A certain flow velocity and flow state are formed by the impeller, causing the sand adhering to organic matter to gradually wash each other and sink to the center of the sand hopper by gravity and vortex resistance. The stripped organic matter overflows upward with the axial water flow. The sand accumulated in the sand hopper is lifted by air or sand pump and enters the sand water separator for thorough separation. The separated sand is discharged to the garbage bin (drum) for transportation, and the sewage flows back to the grid well.

Product advantages

1. Small footprint and compact structure. The impact on the surrounding environment is minimal, and the hygiene conditions are good.

2. The sand settling effect is minimally affected by changes in water volume, and the sand water separation effect is good. The separated sand has a low moisture content and is easy to transport.

3. The system adopts PLC automatic control of sand washing and discharging cycle, with simple and reliable operation.

20170503035235467

Specification and model

model	Processing capacity（m3/h)	Impeller speed (rpm)	Power (kw)	Sand water consumption (m)3/h)	Inlet flow velocity (m/s)	Hydraulic retention time (s)	Number of pump starts (times/day)	Mud removes sand particle properties	blower
									Air volume（m3/h)	Air pressure (Kpa)	Power (kw)
XLC180	180	12-20	0.75-1.1	18	0.6-1	60	4 (10 minutes each time)	Specific gravity greater than 2.65; Particle diameter greater than 0.1mm	1.5	34.3	1.5
XLC360	360										2.2
XLC720	720			34					2	39.2
XLC1080	1080
XLC1980	1980		0.75-1.5	40					2.5	44.1	3
XLC3170	3170									53.9	4
XLC4750	4750			48					2.8
XLC6300	6300									58.8
XLC7200	7200
XLC9000	9000			72					3	69	7.5
XLC12600	12600									78
XLC14400	14400									88	11

Ordering Instructions

1. Please specify the product model, specifications, combination form, and sand discharge method in detail according to the application scenario.

2. Indicate the material and anti-corrosion requirements used for the equipment body.

3. XLC180-XLC1080 can be ordered as a whole according to the steel pool, with sizes greater thanXLC1080 can be made into concrete or welded on-site to make steel tanks.

If you need to integrate the sand water separator with the cyclone sand settling device or have other requirements, you can request additional information and discuss ordering.