Equipment Introduction:
1、 Product introduction of XD single-stage rotary vane vacuum pump:
1. XD rotary vane vacuum pumps are single-stage oil sealed rotary vane vacuum pumps, which are the basic equipment for obtaining vacuum. The working principle is shown in Figure 1.
2. The suction port of the XD rotary vane vacuum pump is equipped with a coarse filter made of metal wire mesh. It can prevent solid foreign dust particles from being sucked into the pump chamber. An exhaust transition device with efficient oil and gas separation effect is installed inside the oil separator. When the pump is stopped, the suction valve built into the suction port isolates the pump from the pumped system, preventing the pump oil from returning to the pumped system. The pump is cooled by air. All pumps are driven by directly connected electric motors through elastic couplings.
2、 Application scope of XD single-stage rotary vane vacuum pump:
1. XD rotary vane vacuum pump is suitable for vacuum pumping in closed systems. Such as vacuum packaging, vacuum forming, and vacuum suction.
2. Inlet pressure range: 100Pa~100000 Pa, beyond this range, oil mist will be generated at the exhaust port of the working vacuum pump. The working environment temperature and suction gas temperature of XD rotary vane vacuum pump should be between 5 ℃ and 40 ℃.
3. XD rotary vane vacuum pump cannot extract water or other liquids. Explosive, flammable, highly oxygenated, and corrosive gases cannot be extracted.
4. Generally supplied motors are not explosion-proof. If explosion-proof or other special requirements are required, the motor must comply with relevant standards.