Detailed information of HOL6000 water oil detector:

brief introduction：

UV water oil analyzerBy utilizing the characteristic of absorption peak of petroleum mineral oil in the ultraviolet region, the oil concentration can be directly measured by photometry. In the case of relatively single water pollutants, water samples can be directly tested. When the pollution is complex, standard extraction and separation methods still need to be used for sample pretreatment.

Purpose：

Direct detection or extraction testing of mineral oil concentration in water, emergency water pollution detection in oil fields/petrochemicals/petroleum storage and transportation, and surface water detection; Wastewater testing, research on river water quality laws, water treatment technology research, research on pollution sources/discharge outlet laws, ultra pure water, industrial and boiler water, tap water, saline water, agricultural water, marine testing, fishery aquaculture, environmental testing, can be directly used for surface water, groundwater, tap water that has not been specially polluted. After sample calibration, it can be used for direct testing of the same water quality in a short period of time. For some special polluted water quality, necessary pretreatment should be carried out according to industry standards, and cannot be directly used for water containing more than 100 microns Water quality of 10mg/L suspended solids in garbage and debris.

Water oil detectorTechnical indicators:

Testing ingredients: water quality, mineral oil
Range: 0.05-50, 200, 600, 10000mg/L
Analyzer accuracy: 1ppm (FS=+/-640mV)
Interface: 4 × 16 LCD display, 4x5 keyboard
Response time:< 1ms
Environmental temperature: -30 ℃~70 ℃ (processor)
Environmental humidity: 0% to 90% R (processor)
Power Supply: 9V rechargeable battery or DC 9V power supply
Battery continuous operation:> 10 hours/pressure drop alarm
Processor size: 98W × 180H × 35D