Water bath constant temperature shaker, water bath constant temperature oscillatorinstructions:

Using at medium speed within the speed range can extend the lifespan of the instrument.

2. The instrument should be placed on a sturdy workbench, with a clean and tidy environment, ventilation and dryness, and convenient water supply and drainage.

Before using the instrument, place the speed control knob in the minimum position and turn off the "oscillation switch".

4. When packing culture test bottles, the following points should be noted: ① uniform distribution; ② The liquid filling amount should not be too small to prevent the test bottle from floating; ③ Seal the bottle mouth to prevent condensed water droplets from dripping into the bottle.

5. Inject tap water into the water tank, with the water level slightly higher than the liquid level inside the culture bottle.

6. Connect the external power supply, place the power switch in the "on" position, and the indicator light will turn on.

7. Choose a constant temperature: Please refer to "5. Operation -5.1 Display -5.2 Set Temperature Value" in the YL-1000 Intelligent Digital Temperature Controller User Manual.

8. Select the timer and adjust the timer knob to the "timer" or "normally open" position.

9. Turn on the "oscillation switch" and the indicator light will turn on. Slowly adjust the speed control knob to the desired speed.

10. Before each shutdown, all switches should be placed in a non working state, the timer should be set to "zero", and the power should be cut off.

11. It is prohibited to use heaters when the water tank is empty. If the instrument is not used for a long time, the water in the water tank should be drained and wiped dry with a soft cloth.