VIP member
Wall thickness gauge
Magna Mike 8600 is a portable wall thickness gauge that utilizes a simple magnetic method for reliable and highly repeatable thickness measurements of
Product details
Magna-Mike ® 8600 is a portable thickness gauge that uses a simple magnetic method to reliably and repetitively measure the thickness of non-ferrous materials. The operation of Magna Mike instrument is very simple. When measuring, hold or move the magnetic probe on one side of the material being measured, and place a small target steel ball (or target disk, target steel wire) on the other side of the material or in a container. The Hall effect sensor of the probe measures the distance from the probe end to the target steel ball. The measured distance is immediately displayed as a thickness reading in large color font on the screen.
Wall thickness gaugeNew features added
|
|
Two new probe designs with replaceable wear caps
Magna Mike offers two types of magnetic probes: flat and angled. Both types of probes are equipped with replaceable wear-resistant caps, which enhances the durability of the probes and reduces the cost of replacing them.
 | |
 Detachable standard wear-resistant cap |
 Removable chisel pointed anti-wear cap |
The measured thickness range is between 0.001 millimeters and 25.4 millimeters
Magna Mike provides users with more target options: 5 different target steel balls, 2 target disks, and 1 target steel wire, greatly enhancing the measurement performance of the instrument.
| target | Zui small thickness | The maximum thickness | Accuracy with standard wear-resistant cap | |
| Basic calibration | More points | |||
| 1.58mm steel ball (80TB1) | 0.001 millimeters | 2.03 millimeters | 4% | 3% |
| 3.17mm steel ball (80TB2) | 0.001 millimeters | 6.1 millimeters | 4% | 2% |
| 4.76mm steel ball (80TB3) | 0.001 millimeters | 9.1 millimeters | 3% | 1% |
| 6.35mm steel ball (80TB4) | 0.001 millimeters | 9.1 millimeters | 3% | 1% |
| Newly added4.76mm magnetic beads (86TBM3) | 4.06 millimeters | 19.05 millimeters | 3% | 1% |
| Newly added6.35mm magnetic beads (86TBM4) | 4.06 millimeters | 25.4 millimeters | 3% | 1% |
| 12.7mm flat edge disc (80TD1) | 0.001 millimeters | 9.1 millimeters | 3% | 2% |
| 6.35mm V-shaped circular disc (80TD2) | 0.001 millimeters | 6.0 millimeters | 3% | 2% |
| Newly addedSteel wire with a diameter of 1.14 millimeters (86TW1) | 4.06 millimeters | 12.7 millimeters | 3% | 2% |
| notes: |
Measurement error=± [(accuracy x thickness)+0.0001 inch] Measurement error=± [(accuracy x thickness)+0.003 millimeters] |
Built in alphanumeric data logger
Magna Mike is equipped with a file based extended alphanumeric data logger for convenient storage and transmission of thickness readings.
The data logger can store thickness readings in four standard file formats: incremental, sequential, sequential with custom points, and two-dimensional raster.
- You can use WINXL to directly transfer data to an Excel spreadsheet in separate or file format
- Send data to other SPC programs
- USB and RS-232 outputs
- Export files in. txt or CSV format to a pluggable MicroSD card
- Create onboard report
- Wall thickness gauge data
Connect directly to an Excel spreadsheet
The Magna Mike 8600 comes with RS-232 and USB outputs, allowing the instrument to directly transfer data to an Excel spreadsheet. The built-in WINXL interface program can transmit thickness readings separately or in file format.
WINXL interface program
Specifications
| General specifications | |
| Overall dimensions | 236 mm x 167 mm x 70 mm （9.3 in. x 6.57 in. x 2.76 in.） |
| weight | 1.68 kilograms, including lithium-ion battery |
| keyboard | English, Japanese, Chinese, international symbols |
| language | English, Spanish, French, German, Japanese, Chinese, Portuguese, Swedish, Norwegian, Dutch, Polish, Russian, Hungarian, Czech, and Italian |
| data storage | Onboard 2 GB MicroSD card and pluggable 2 GB MicroSD card |
| Battery power supply time (optional) | 12 hours to 13 hours (lithium-ion) |
| Power requirements | AC main power supply: 100 VAC~120 VAC, 200 VAC~240 VAC |
| Display type | Full color VGA (640 x 480 pixels) translucent color LCD |
| Display screen size (width x height, diagonal) | 117 mm x 89 mm，146 mm （4.62 in. x 3.49 in.，5.76 in.） |
| Zui Small/Zui Large Measurement Mode | Measure at a rate of 60 Hz |
| Display refresh rate | 4 Hz, 8 Hz, 16 Hz, and 20 Hz |
| call the police | High alarm and low alarm |
| resolving power | 0.1 mm, 0.01 mm, 0.001 mm (depending on thickness range) |
| data logger | Built in alphanumeric data logger based on files |
| probe | |
| 86PR-1 | Standard flat probe, length 82.30 millimeters, diameter 18.62 millimeters |
| 86PR-2 | A probe with a right angle at the head, measuring 58.84mm x 18.62mm and 178.57mm in length |
| Environmental testing | |
| Anti vibration test | Passed the tests specified in MIL-STD-810G Method 514.6 Procedure I of the US military standard. |
| Fall prevention test | Passed the tests specified in MIL-STD-810G Method 516.6 Procedure IV of the US military standard. |
| Anti impact test | Passed the test in MIL-STD-810G method 516.6 procedure I. |
| Designed to comply with IP67 standards | yes |
| Input/Output | |
| USB | USB 2.0 peripheral device port |
| RS-232 | have |
| Memory card | Zui Large Capacity: 2 GB Pluggable MicroSD Memory Card |
| Video output | VGA output standard |
| Foot switch (optional) | Programmable (save, send, measure, or quickly calibrate) |
| working temperature | -10 °C～50 °C |
Standard set of components
- 86PR-1（U8470020）：Standard probe
- 86PC （U8801410）：Probe cables for 86PR-1 and 86PR-2
- 86PRS1 （U8780323）：Two piece probe stand for 86PR-1
- WinXL （U8774010）：Interface program for connecting Excel
- 86ACC-KIT （U8771068）：Standard calibration package
- EP-MCA：External power supply with charger
- 8600-MAN-CD （U8778535）：CD containing instruction manual (in all languages)
- 600-TC （U8780294）：Plastic carrying case
- Choose one of the following two options:
- 600-C-RS232-5 （U8780299）：RS-232 cable
- EPLTC-C-USB-A-6 （U8840031）：USB cable
Choose accessories
- 600-C-VGA-5 （U8780298）：VGA output cable
- 600-BAT-L （U8760056）：Rechargeable lithium-ion battery
- 85FSW （U8780127）：Remote foot switch
- 86PR-2 （U8470028）：Right angle probe
- 86PRS2 （U8771044）：Two piece probe stand for 86PR-2
- 86PCC （U8780323）：Coiled cables for 86PR-1 and 86PR-2
- 86PR1-WC （U8780324）：Removable anti-wear caps for 86PR-1 and 86PR-2 probes
- 86PR1-CWC （U8780326）：Chisel type anti-wear cap for 86PR-1 and 86PR-2 probes
- 80TB1 （U8771030）：Target steel ball, 1.59 millimeters (1/16 inch)
- 80TB2 （U8771031）：Target steel ball, 3.18 millimeters (1/8 inch)
- 80TB3 （U8771032）：Target steel ball, 4.77mm (3/16 inch)
- 80TB4 （U8771022）：Target steel ball, 6.35 millimeters (1/4 inch)
- 80TD1 （U8771034）：Target disk, flat edge
- 80TD2 （U8771035）：Target disk, V-shaped edge
- 86TBM3 （U8771039）：Target magnetic bead, 4.76mm (3/16 inch)
- 86TBM4 （U8771040）：Target magnetic bead, 6.35 millimeters (1/4 inch)
- 86TW1 （U8771041）：Target steel wire with a diameter of 1.14 millimeters (0.045 inches)
- 86ACC-ER-KIT （U8771069）：Extended calibration package
- 86ACC-W-KIT （U8771070）：Target Steel Wire Calibration Package
- 86ACC-D-KIT （U8771071）：Target disk calibration package
- 80CAL-NIS （U8771011）：NIST Tracking Standard Calibration Blocks (set of 6)
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-