WSC New Venturi Water Film Dust CollectorIt is a purification device that uses dusty gas to impact the inner wall of a dust collector or other special structural components to create a water film, which captures dust and purifies the gas.

The working principle of the new Venturi water film dust collector is that the dust containing gas is introduced from the upper part of the cylinder in a tangential direction, rotates and descends, and the dust particles are separated by centrifugal force and thrown towards the inner wall of the cylinder. They are adsorbed by the water film layer flowing on the inner wall of the cylinder and discharged through the dust outlet along with the water flow to the bottom cone. The formation of the water film layer is achieved by spraying the nozzle inside the Venturi injector into the dusty gas to form a water mist. The water mist wraps the dust and sprays it tangentially onto the wall of the injector. In this way, the inner wall of the cylinder is always covered with a thin water film that rotates downward, achieving the goal of improving dust removal efficiency.

WSC New Venturi Water Film Dust CollectorCharacteristics:

1. Adopting the form of Venturi jet and swirling water separator, the dust removal efficiency is high.

2. Adopting a circulating water spray structure, the water consumption is small and the energy consumption is low.

3. Special anti-corrosion materials with a wide range of applications.

4. The device has a beautiful appearance, simple operation, and high safety.

5. This device can meet emission standards and comply with environmental protection requirements.

Technical parameter table:

Welcome new and old customers to make purchases

Abundant drying expert in the world