main features
Strong adaptability - Compared with tuning fork level switches, single rod probes can effectively prevent material clamping and sticking, and can still work stably even when there are many hanging materials. Capacitive level switch

Compared to being unaffected by the electrical parameters of the tested medium, changes in material variety and humidity do not affect the operation of the sensor.
No need for calibration - after installation, it can be put into stable operation without adjustment.
High sensitivity - capable of measuring materials with extremely low specific gravity.

TECHNICAL INDEX
Power supply voltage: AC 220V 50Hz/DC 24V
Power consumption: 1.5W
◇ Working environment: Instrument section: -30~70 ℃
Probe section: -30~100 ℃ (high temperature type -30~150 ℃)
◇ Work pressure: less than 2MPa
◇ Vibration time: 1-5 seconds
◇ Response time: approximately 1 second
Output mode: A set of relay outputs (AC 220V/3A, DC30V/3A)
Sensitivity: High, medium, and low levels can be set
◇ Installation connector: R1.5/G1.5/flange (customizable according to requirements, minimum thread of 1.5 inches)
Electrical interface: M20 × 1.5
◇ Insertion depth: ≥ 260mm