Vibration drill
Our company produces vibration components: anode vibration hammer, cathode vibration hammer, hammer head, vibration drill, clamp, dust cover, dust cover, upper and lower fork, anode gear plate, cathode gear plate, coupling joint, cathode drive shaft, vertical shaft support plate, bearing seat, dry grinding dust bearing, vertical shaft bearing, center dust bearing, dust bearing, three wheel vertical bearing, four-wheel vertical bearing, four-wheel dust bearing, impact head, dust bearing limit, etc.
The injection pressure of compressed air is an important operating parameter, with an initial injection pressure of (5-6) × 105Pa. After research and improvement, the injection pressure has been reduced to (2-3) × 105Pa, and good dust cleaning effect can still be achieved. Its filtering wind speed can reach 2-4m/min. The resistance is controlled by timed control or constant pressure difference control, generally ranging from 1000 to 1500Pa.
There are various forms of pulse bag dust collectors, such as the annular gap type using a bad spray Venturi tube, the forward spray type with the same direction of spray airflow and dust containing airflow, the counter spray type with simultaneous spraying on the filter bag, and the pulse flat bag dust collector