This vibrating conveyor is suitable for conveying various powder, granular, block, and mixed materials with temperatures below 300 ℃. Widely used in industries such as building materials, metallurgy, chemical engineering, and coal, for example: conveying raw materials, intermediate semi-finished products, and finished products in the cement industry; Transportation of high-temperature sintered ore materials in the steel industry, etc. It is a highly versatile and structurally advanced long-distance high-temperature material vibration conveying equipment.

This conveyor has a large conveying capacity, good insulation effect, does not require cooling devices, and consumes only 20-50% of the power of general conveying equipment; Simple structure, easy debugging, quick start and stop, smooth operation, good vibration isolation performance, low noise, and minimal tank wear; Easy to install, no need for dedicated foundation or anchor bolts, easy to move position, few types of vulnerable parts, easy to maintain; It can be fed and unloaded through multiple ports, and can also be fed through a trough. Suitable for conveying cement clinker and slag at the bottom and top of the warehouse; It can be transported in a fully enclosed manner to eliminate dust, and can also be transported in an open manner to isolate and transport different materials simultaneously; The single machine conveying distance can reach up to 30 meters, and the multi machine soft connection can be extended as needed, and can be inclined upwards by less than or equal to 10 degrees.

Long distance vibrating conveyor

The high-temperature resistant horizontal vibration conveyor adopts two vibration motors as the excitation vibration source. Using the self synchronization principle, the two vibration motors rotate in reverse, causing the bottom balance frame of the conveyor to produce reciprocating vibration. Through the action of the main vibration spring and the guide plate spring, the upper conveyor groove is driven to vibrate, thereby achieving the purpose of conveying materials. There are two types of SCG long-distance vibration conveyors: open and closed. The cross-section of the material trough can be made into various forms such as circular, rectangular, and trapezoidal. The feeding and discharging of the material trough can also be made into various types such as one point feeding, one point discharging, one point feeding, multi-point discharging, multi-point feeding, and one point discharging as needed. When the conveying distance is long, multiple conveyors can be connected to transport. The SCG long-distance vibration conveyor material trough is supported by rubber springs or steel springs, and relies on the self synchronous operation of two vibration motors fixed on the material trough to generate linear vibration.

Product features of horizontal vibration conveyor:
1. It can be transported in a fully enclosed manner to eliminate dust pollution, or it can be transported in an open manner;
2. Large conveying capacity, good insulation effect, no need for cooling device, low power consumption;
3. Simple structure, easy debugging, limited variety of vulnerable parts, and convenient maintenance;
4. Quick start and stop, smooth operation, good vibration isolation performance, and low noise;
5. Easy installation, no need for dedicated foundation or corner bolts, easy to move position;
6. The distance of a single conveyor can reach 20 meters, and the soft connection of multiple machines can be extended as needed;
7. It can be fed and unloaded at multiple points, suitable for conveying cement clinker and slag at the bottom and top of the warehouse.