This equipment is applicable to the instantaneous sterilization of liquid materials such as fresh milk, fruit juice, beverage, ice cream, ice cream slurry, soy sauce, soybean milk, condensed milk, alcohol, etc., as well as the sterilization of fluid materials. Main structure and working principle: The ultra-high temperature instantaneous sterilization machine is equipped with a pressure vessel - a high temperature barrel - inside the main unit, which is used to fill pressure steam. The main setting outside the barrel is a spiral double tube, which is used for cold and hot exchange of incoming and outgoing materials; The main settings inside the bucket Spiral shaped single tube, used for indirect heating. The sterilization process of materials. The material enters the outer channel of the double coil through the feeding pump, and is indirectly heated by the hot material flowing out from the inner layer to obtain preheating. When the material enters the high-temperature barrel set inside When using high-temperature coils, the steam inside the barrel is indirectly heated to the required sterilization temperature, and then insulated inside the single coil outside the barrel to kill the bacteria in the material. When returning to the double coil, the material enters the inner channel and is The outer layer of cold material is cooled, resulting in a significant decrease in the discharge temperature (generally below 65 ℃). If it is necessary to increase or decrease the discharge temperature in the process, an angle type shut-off valve can be used to connect it to a heat source (steam) or a cold source (water or ice) Let them enter the outer flow channel at the lower end of the double casing, such as water. The throttle valve is adjustable. On the one hand, it keeps the material under a certain pressure to increase its boiling point temperature and prevent vaporization. On the other hand, it is also used for regulation Used for traffic. The material is finally discharged through a three-way valve. The lower end of the plug is connected to the rotary pipe, and its outlet is connected to the storage tank. When needed, the rotary pipe can be rotated to align with the overflow pipe. The upper end of the feed three-way valve is connected to the storage tank, while the lower end is connected to the material source Connect pipelines together. Main technical parameters:

PRODUCT MODEL	RSCG-1	RSCG-2	RSCG-3	RSCG-4
Processing ability	0.5～ 1t/h	1.5～ 2t/h	3～ 4t/h	5～ 6t/h
sterilization temperature	115 ～ 135 ℃	115 ～ 135 ℃	115 ～ 135 ℃	115 ～ 135 ℃
Using steam pressure	<0.78MPa	<0.78MPa	<0.78MPa	<0.78MPa
High temperature heating time	4 ～ 6S	4 ～ 6S	4 ～ 6S	4 ～ 6S
Feed temperature	<45 ℃ (with cooling pipes)	<45 ℃ (with cooling pipes)	<45 ℃ (with cooling pipes)	<45 ℃ (with cooling pipes)
Discharge temperature	<65 ℃	<65 ℃	<65 ℃	<65 ℃
steam consumption	<0.12Kg/L material	<0.15Kg/L material	<0.15Kg/L material	<0.20Kg/L material
Motor Power	1.5kW	2.2kW	3kW	4kW
External dimensions	1200×920×1650	1300×1100×1700	1600×1200×1800	1940×1400×2000
cover an area	1.104m 2	1.43m 2	1.92m 2	2.716m 2