Ultra fine grinding machine

1. The solid particles that are ground and processed are coarse in size and placed in a ceramic mortar;
2. The bottom of a ceramic mortar is a strictly hemispherical surface, which is hard, wear-resistant, and very smooth. The ceramic mortar is driven by a slow speed reduction motor to rotate on its own;
3. The head of a ceramic grinding rod is also strictly a hemisphere, and the centerline of the grinding rod intersects with the centerline of the mortar at a suitable oblique angle. The grinding rod is inserted into the mortar, and a compression spring is installed inside the rod. The rod head is tightly attached to the bottom of the mortar under the action of the spring. The research rod is driven by a high-speed deceleration motor to rotate in a manner similar to the trajectory of a conical body.
4. The mortar and pestle, each with its own motion, form a clever crushing and grinding method for coarse particles.
5. Due to the grinding motion formed by ceramic mortar and grinding rod, the grinding opportunities for solid particles are equal, and the particle size of micro powder is very uniform.
6. The selection of grinding time can be set through automated control. After a reasonable period of grinding, coarse particles are ground into very fine micro particles, with particle sizes reaching the micrometer level and some reaching the nanometer level.