VIP member
UNIA Cone Bottom Grain Warehouse FARMA P
UNIA Cone Bottom Grain Warehouse FARMA P
Product details
- The hood effectively prevents moisture accumulation below the top of the warehouse
- 30 ° conical roof
- Warehouse roof ventilation outlet
- Ventilation inlet with a diameter of 160mm
- 45 ° conical silo bottom, discharge port with a diameter of 200mm, silo bottom height 0.6mm above ground
- The warehouse wall is composed of high-quality galvanized corrugated steel plates, which improve durability and anti-corrosion protection, reflect sunlight and reduce heat accumulation
- Escalators and guardrails facilitate safety inspections
- Feed inlet diameter 250mm
30 ° conical roof, made of smooth steel plate coated with Galvan coating
The feeding port is located in the middle of the top of the silo and is used to feed grain into the silo
The ventilation outlet on the top of the warehouse allows for proper ventilation of stored grains
External escalators and guardrails facilitate safe inspection of the feeding inlet on the top of the warehouse
45 ° conical silo bottom, discharge port with a diameter of 200mm, made of smooth steel plate, no auxiliary equipment required, only the weight of the grain is needed to empty the silo
Ventilation system, allowing air to pass through stored grains and preventing moisture accumulation in the warehouse
The warehouse wall is composed of high-quality galvanized corrugated steel plates, which improve durability and anti-corrosion protection. The assembly of individual components is simple and fast, and the structure is stable and firm
Manual valve, used to close the discharge port of the grain silo
Partial technical parameters:
| model | Effective capacity [m ³] | Load weight [t] | Total height [m] | Cylinder height [m] | Cone height [m] | Diameter [m] | Weight [kg] |
| 100 | 125 | 97 | 11.21 | 6.89 | 3.0 | 4.6 | 2950 |
| 180 | 233 | 182 | 12.55 | 6.89 | 3.9 | 6.1 | 4750 |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-