The UHZJ series heat tracing magnetic float level gauge is mainly used for liquid level or boundary measurement of equipment that requires antifreeze, insulation, heat insulation, and heating. If a liquid level alarm switch and a remote transmitter are installed on the instrument, remote control, automatic detection, and recording can be achieved. According to the structural form of the jacket, it can be divided into UHZ-W ordinary jacket type, UHZ-WK vacuum jacket type, and UHZ-WD electric heat tracing type.

UHZJ ordinary heat tracing type is a cylinder added to the measuring tube of the liquid level gauge for the circulation of steam, circulating water or heat transfer oil.

UHZJK vacuum tracing type is an insulation effect achieved by adding a layer of vacuum cylinder to the measuring tube of the liquid level gauge to insulate the measured medium from the outside.

UHZJD electric tracing type is to wrap an electric tracing strip around the measuring tube of the liquid level gauge to heat the medium.

● Operating pressure: ≤ 6.3MPa
Operating temperature: 0-450 ℃
Measurement range: 300-6000mm (extra long liquid level gauges can also be made according to user needs, and extra long ones can be made in sections due to inconvenient transportation.)
● Medium density: 0.45-2.0g/cm³
Clamp pressure: ≤ 2.0MPa
● Clamp joint: GExternal thread or user specified HG/T20592-2009 DN15 PN25 PL/RF flange or user specified
● Connection flange standard: HG/T20592-2009 DN20 or specified by the user (various standard flanges such as GB, HGJ, ANSI, SH, DIN, JIS, etc. can be made according to user requirements at home and abroad)