VIP member
Tube heating fully automatic CIP system
Fully automatic CIP cleaning system CIP cleaning system, commonly known as on-site cleaning system, also known as cleaning in place or cleaning in pla
Product details
1、 Working principle of fully automatic CIP cleaning system
Fully automatic CIP cleaning systemThe working principle is to control the opening and closing of the steam valve by measuring the temperature through a thermal resistor; Control the opening and closing of the water valve by measuring the liquid level through a pressure transmitter; The opening and closing of alkali and acid diaphragm valves are controlled by the conductivity measured by the conductivity meter. The overall control process is water heating - alkaline cleaning - hot water flushing - acid cleaning - hot water cleaning.
2、 Technical parameters of fully automatic CIP cleaning system
reminder
1. The CIP cleaning system parameters in the chart are all standard configurations. If the customer has other requirements, please provide them
2. The process parameters required for selecting a CIP cleaning system include material properties, output, special requirements, etc.
3、 Structure composition of fully automatic CIP cleaning system
fully automaticCIP cleaning systemIt consists of acid tank, alkali tank, hot water tank, pure water tank, concentrated acid and alkali tank, heat exchanger, various pipelines and pneumatic valves, pressure transmitter, conductivity meter, platinum resistance thermometer and control system.
4、 Characteristics of fully automatic CIP cleaning system
1) Fully automaticCIP cleaning systemUsing a human-machine interface (touch screen) and image display makes it easier for the operator to control and monitor.
2) Fully automaticCIP cleaning systemCan automatically detect cleaning solution Add liquid Emissions Display and adjustment ensure reliable operation, high degree of automation, simple operation, and excellent cleaning effect, making it more suitable for modern large-scale fluid drugs Hygiene requirements and production environment requirements for food processing technology.
3) Automatically adjust the temperature of water, acid, alkali cleaning solution, hot water, and other levels.
4) By switching screens, you can freely choose between automatic or manual control.
5) Develop and modify programs on-site to meet specific customer requirements and implement special controls.
6) Fully automaticCIP cleaning systemAccording to customer needs, centralized control can be achieved.
7) A flexible human-machine dialogue interface allows operators to easily select each operating program. The touch screen will faithfully display options and temperatures at various stages of actual production Time conductivity and other conditions are convenient for real-time monitoring.
5、 Operation and use of fully automatic CIP cleaning system
1. The operator must be fully familiar with the structure and performance of this equipment, and can only operate it after training.
2. Before and after use, the equipment must undergo a careful inspection of the internal cleaning of storage tanks and pipelines.
3. In the storage tank, prepare acid and alkali solutions according to the concentration specified in the cleaning process, and inject clean water into the clean water tank. The loading capacity coefficient of the stored liquid is 80%.
4. Carefully inspect and adjust the instruments of the equipment to ensure their stable, accurate, and reliable operation.
5. According to the cleaning process requirements, determine the total and specific cleaning time for each equipment or pipeline, as well as the temperature control range for acid and alkali solutions.
6. Connect the swing pipe between the cleaning solution inlet and the outlet of the equipment to be cleaned on the cleaning solution output pipeline distributor. After checking and confirming that the pipeline connection is correct, the centrifugal pump can be started for cleaning work. During the cleaning work of this equipment, the opening and closing of each valve are manually operated.
7. CIP cleaning procedure: water → alkali solution → water → acid solution → water. The entire cleaning process and program time can be determined by each user manufacturer according to actual needs. For some equipment or pipelines that are relatively easy to clean, acid washing is not necessary, and cleaning can be carried out according to the sequence of clean water → alkali solution → clean water.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-