Through type covered film tray winding packaging machineMain technical parameters/performance:

1. Basic parameters:

Maximum wrapping size:（900-1000）*（900-1200）*（900-1800）mm

Packaging speed:20-40 pallets per hour (depending on the size of the goods)

Turntable speed: 0-13RPM

Whole machine weight:2500kg

The goods will move forward in the direction of 1000mm.

2. Rotary drive components (1 set):

2.1. Motor frequency conversion speed regulation;

2.2. Rotary reducer:Flange brake type

2.3 Power: P=1.5KWsupply voltage380V/3P/50HZ

2.4. Drive speed: n=10-20rpm (variable frequency speed regulation)

2.5Double ChainTransmission structure.

3. Membrane frame lifting component (1 set):

3.1Adopting a dual chain structure, the film frame can be raised and lowered at adjustable speeds, and the film feeding speed can be adjusted

XingPack Company: The columns are made of cold-rolled steel plates, with a thickness that fully meets national standards and is sturdy and durable. The guide rail adopts a U-shaped guide rail firsttechnologyIt has bidirectional positioning, low noise, reliable and durable stability in the rise and fall of the film frame, and the packaging effect of ultra-high goods is quite obvious

3.2. Model of membrane frame lifting drive reducer: turbine vortex rod reducer

3.3. Motor power: 0.37kw

4. Rackdeliver(1 set):

4.1. The rack is made of square tube steel structure, MaterialQ235；

4.2. The upper part of the rack is equipped with a transmission mechanism;

4.3 Variable frequency adjustable conveying speed;

4.4 The equipment meets the tray styles: Sichuan shaped, flat shaped, Tian shaped, and Jiuzi pier shaped.

5. Membrane frame components (1 set):

5.1 Install photoelectric switches on the membrane frame to automatically detect the height of the goods.

5.2 Communication frequency conversion drive system

5.3. Motor power: 037KW

5.4. The stretching ratio of the film frame is 1:3, and the film feeding speed can be adjusted;

5.5. Membrane rack follow-up mechanism, membrane replacement door safety protection;

5.6. The swing arm of the film frame for film feeding rotates, and the proximity switch controls the start and stop of the film feeding motor to achieve the follow-up of film feeding;

5.7. Transmission mechanism: Chain transmission.

6. Upper and broken film device (1 set):

6.1 After winding is completed, automatically cut the film and clamp the film head;

6.2 Working voltage:380V AC/3-phase 5-wire/50Hz

Gas consumption: 1000ml/min

Pneumatic working pressure: 0.5~0.6MPa

7Coating system (1 set)

Equipment model: XFM1500

Top laminating machine:

Cargo height:900mm-1800mm

Film covering efficiency: 15-35 pieces per hour (max)

The addition of film covering control system and the addition of human-machine interface touch screen on the control cabinet

Automatic pneumatic cutting of film covering, which can automatically clamp the broken end during cutting for the next cycle of packaging

Film covered lifting motor power:380V 1.5KW

Traction motor power:380V 0.9kw

Working voltage:380V AC/3-phase 5-wire/50Hz

Gas consumption: 1000ml/min

Pneumatic working pressure: 0.5~0.6MPa

Safety Chain Institution:

1. Start the turntable and interlock the conveyor line;

2. OptoelectronicsoverflowReflection board safety principle:

3When there is an object on the host, the feeding waiting position on the conveyor line stops feeding and waits for the host signal. After the packaged material on the host is packaged and taken away, the host begins to provide a feeding signal to the buyer and enters the packaging state. If the packaged goods are not taken away by the packaging machine, the host enters the standby state.

Control system:

1. PLC programmable control, winding layers and times can be set;

2. Photoelectric switch, automatically sensing the height of goods;

3. The turntable drive is10BchainTransmission and precise positioning;

4. Thin film system:

4.1. Membrane frame power pre stretching mechanism, pre stretching can reach 300%.

4.2. The rising and falling speeds of the film rack are adjustable, and the film feeding speed is adjustable.

5. This machine is equipped with automatic and manual switching functions to better ensure the operation of the packaging system.